Wow, great job. Pretty handy guy. Thanks for sharing.
Slab/members- Here is a ruler I mentioned a few days back that I said could be easily made using the, when available(coming to a neighborhood near you), Crappie.com self-adhesive measuring tape. Mine was made from available 1 1/4" flat, plastic strip I already had but could easily be made from material du jour. It consisted of the following steps 1- Cut 3- 13" pieces(strips) of stock 2- (heat gun/bend a 90* bend) for a lip-stop in one of the strips 3- Cut 3- 12" pieces of adhesive ruler(mine was from an available, free vendor) 4- Peeling back only an inch of adhesive backing to start alignment, adhering each strip to stock 5- On 2nd/3rd strips you will have 1" margin to use as a hinge pivot-point 6- Align 1st two strips and secure(i used a vice) and drilled a rivet-sized hole to insert a rivet(I used aluminum with 2 stainless tight-fitting washers...upper/lower)**important note: make sure your rivet length is about 1/8" longer than thickness of 2 strips of stock and washers. Sounds involved but really satisfying easy/peasy = See attached pic for finished product...now, can someone return the favor by pointing me in the direction of a 30" crappie!!
Have fun "measured fish pics RULE"!
u2s
Last edited by up2specks; 12-29-2018 at 07:10 AM. Reason: pics
Wow, great job. Pretty handy guy. Thanks for sharing.
up2specks, Pondfisher42 thanked you for this post
Yes Ed- Being handy should yield one's>
u2s
How's that ruler decal comin' now??
How about now?? Pics don't lie
Last edited by up2specks; 12-29-2018 at 07:34 AM. Reason: pic
Phantom309, DwightP980 LIKED above post
up2specks LIKED above post
Make sure their an eighth longer. Cause the bump stop takes up the first 1/8". That'll get ya in a lot of trouble on the big 4
Sent from my SM-G900V using Crappie.com Fishing mobile app
Hope you're not a real snake in the grass. Guess you caught me! Actually, after making the lip stop bend, and fitting the pre cut 1st section I was now 1/8th " shy. I cut it off the logical end making it a true "fisherman ruler"! My question for you "how many vertical not horizontal dots are there on my ruler's backdrop??
u2s
Sent from my SAMSUNG-SM-G930A using Crappie.com Fishing mobile app
Thanks for checkin' on me! CURIOSITY takes me there, SUCCESS ushers me back!
Oops, forgot to tell you that you misspelled they're.
Sent from my SAMSUNG-SM-G930A using Crappie.com Fishing mobile app
Thanks for checkin' on me! CURIOSITY takes me there, SUCCESS ushers me back!
DwightP980 LIKED above post
That bugs me too. As far as the dots, I don't have time to count them and I'd really worry about your (spelled correctly this time) sanity if you did. Lol Nice concept though.
Sent from my SM-G900V using Crappie.com Fishing mobile app
up2specks LIKED above post