I don't have that unit so I can't offer any help. I did look at Bass Boat Central to see if anyone else from there had that issue but didn't fiind a recent topic on the issue.
I used ActiveCaptain to upload 35.10 on my GPSMap 8610xsv and am experiencing flickering on my LiveScope screen that goes from a perfect view to a smudged flickering view then back again. Adjusted multiple settings including gain to no avail. Anyone else experience this? Sent an e-mail to Garmin as there is a 1 plus hour wait on the phone. Dennis
Sent from my iPad using Crappie.com
I don't have that unit so I can't offer any help. I did look at Bass Boat Central to see if anyone else from there had that issue but didn't fiind a recent topic on the issue.
that's why i hate updates
I have a lowly 7 inch echomap plus. I just checked yesterday and there were no updates available. Is the 35.10 only for certain units?
Mike Perry
Its only for UHD2 and Ultra2 units.
Plus units stopped being updated a couple years ago at 13.4 you dont have to worry about any updates.
Echomap UHD 73/93 are discontinued at 27.1
Ultra 106/126 are discontinued at 28.0
Sent from my SM-A516U using Crappie.com mobile app
This issue has been identified and reproduced by Garmin engineers. Until software is released to correct the issue, a temporary workaround is to leave the LiveScope page, open a traditional sonar page, and then return to the LiveScope page. The Livescope image should then return to normal. If issues reappear, repeat the workaround as needed.
crappiemax LIKED above postgrizwilson thanked you for this post