Thanks: 
Reply With QuoteAwesome. Hope you enjoy them
HaHa: 0
Crappie.com Legend
Impulse lithium arrived today
Brown truck pulled up today with my new cranking/accessory battery.
Went with the 120 AH, and a Noco 1 bank 10 amp charger for it. First impression, everything looks great, and Bill has been outstanding to deal with. Answers my text about any questions I’ve had pronto. I’m really thrilled with the bluetooth function.
Here are a couple screenshots of when I first got it hooked up
NOT griping, but be advised - it has bolts instead of studs on the terminals. Comes with really short bolts too. I know this is probably not ideal, but I have a stack of ring terminals on my + post… had to make a run to the parts store for longer bolts. And the threaded holes in the terminals are fairly shallow and blind holes. So have to be careful with bolt lengths so as to tighten without bottoming out.
Oh, and from what I can tell, the bolts are 8mm metric.
Not to forget, the C.Com discount is greatly appreciated!
Sent from my iPhone using Crappie.com
Shoals Area Crappie Association
Super Moderator
* Crappie.com Supporter
Super Moderator
* Crappie.com Supporter * Member Sponsor
Goin to run your graphs on it Jeff?
“If your too busy to fish, you’re too busy!” Buddy Ebsen
PROUD MEMBER OF TEAM GEEZER
(Billbob and “G” approved!)
Proud member of Tekeum’s Jigs Pro
Staff
https://heavenornot.net/
heavenornot.net
Crappie.com Legend
Super Moderator
* Crappie.com Supporter
Crappie.com Legend
Impulse lithium arrived today
This was my work-around for the bolt situation. I would have preferred stainless, but had to settle for cad plated. It’s a podunk town here
Gonna finger tighten with all my cables added in till it bottoms, then use the nut to snug down the connection. 13mm wrench.
Sent from my iPhone using Crappie.com
Crappie.com Legend
Yessir that is the plan. Unless I find I have to have a separate battery with this live sonar thing? All this new stuff is strange to meOriginally Posted by BuckeyeCrappie
Sent from my iPhone using Crappie.com
Shoals Area Crappie Association
Super Moderator
* Crappie.com Supporter
That’s what I did with my Amped Outdoor battery. Mines a 30Ah for my kayak. And I found some stainless.This was my work-around for the bolt situation. I would have preferred stainless, but had to settle for cad plated. It’s a podunk town here
Gonna finger tighten with all my cables added in till it bottoms, then use the nut to snug down the connection. 13mm wrench.
Sent from my iPhone using Crapp
Crappie.com Legend
* Member Sponsor
We make terminal adapters for the ones wiith the regular studs,need to get a pic.This was my work-around for the bolt situation. I would have preferred stainless, but had to settle for cad plated. It’s a podunk town here
Gonna finger tighten with all my cables added in till it bottoms, then use the nut to snug down the connection. 13mm wrench.
Sent from my iPhone using Crapp
Sent from my SM-S515DL using Tapatalk
Quailtail LIKED above post
Crappie.com 1K Star General
CraftyThis was my work-around for the bolt situation. I would have preferred stainless, but had to settle for cad plated. It’s a podunk town here
Gonna finger tighten with all my cables added in till it bottoms, then use the nut to snug down the connection. 13mm wrench.
Sent from my iPhone using Crapp
Sent from my iPhone using Tapatalk
