Can you mount the LVS34 transducer on the Ulterra or will it have to go on a pole? I am concerned with the automatic deploy and retract operation of the motor.
Can you mount the LVS34 transducer on the Ulterra or will it have to go on a pole? I am concerned with the automatic deploy and retract operation of the motor.
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
It will go on but you'll find the foot pedal for ultera and terrova SUCK for sniping open water crappie. If you can ultrex is the way to go. Night and day difference. Scott
Too stupid to explain the mechanics behind the 2 designs but they are night and day different IMHO. You can take a small piece of board like a 1" x 2" and attatch it in the middle of the pedal to give you something to rock your foot back and forth on and it's better but not even close to the degree of control you have with ultrex in making very small micro adjustments to keep a fish and jig on the screen. It is not that you can't catch any fish with that set up, the reason I'm familiar is have a couple of friends with the same set up but as you get " good " at sniping you will catch more IMHO.If your primary method of fishing is using the remote or spotlock the they are fine. Scott
I despise my terrova foot control. Its junk compared to others as far as feel goes
ultraslab LIKED above post
Its has been my understanding and belief that by the nature of its design and its self stow and deploy capabilities that you shouldn't attach anything to the Ulterra shaft.
IT2(SW) 2005-2009grizwilson LIKED above post