Thread: Mega live interference

Try turning the sonar to the unit displaying Mega live off. It will still use Mega live without sonar. If you have any other units either turn them off or place in standby when not using. if you have a 360 you could try either turning that off as well or mess with your noise rejection settings.

Sent from my SM-S215DL using Tapatalk

The only other unit is a map only unit no transducer. Will try to turn the sonar off while using ML. Don't know how to do that but will figure out tomorrow

Originally Posted by johndeere5045

The only other unit is a map only unit no transducer. Will try to turn the sonar off while using ML. Don't know how to do that but will figure out tomorrow

Press the power button one quick press and “Sonar On/Off” will be available in the popup window ...

Rickie

Kinda resembles the "ghost tree" on Livescope.

Was it there before the updates ??

Yes it was there before any updates. It wouldn't be so bad , but it right n that 10 - 15 ft range to fish from boat. Hope turning sonar off will help.

Here is a read from bbc forum on interferance even tho they are discussing 360. Might try it if you haven’t. Mega live with 360 interference.

I sometimes get alittle flash from Mega Live as I get shallower than 8 feet coming from mega 360..but..just lost one side of the SI transducer in my mega 360 and going to UPS it back to HB this morning so won’t have my 360 running for a week. I haven’t figured hour to get rid of the flash yet in shallow water and if I turn off the Mega 360,,no issues for me. I think sometimes we need to adjust the noise rejection settings depending on water depth as well as hardness of bottom,,but will test to see.

No luck, tried turning off sonar, didn't help. Can turn sensitivity down to -10 it will go away. That's the only way I can get it to go away. Then I can't see anything else.