How long is the run of wire?
Sent from my iPhone using Crappie.com Fishing mobile app
Bought a Tracker new back in 17 with a 12v MK Edge. Looking to upgrade to a 24v Terrova. Will the 8 gauge wire it has now handle the upgrade? Any help would be appreciated.
Sent from my SM-N960U using Crappie.com Fishing mobile app
How long is the run of wire?
Sent from my iPhone using Crappie.com Fishing mobile app
Proud Member of Team Geezer!
175 tracker so, 16 to 19 feet
Sent from my SM-N960U using Crappie.com Fishing mobile app
#8 gauge might be alright; I use #8 with my Tv24, but my batts are up front and the run is very short. I bet hardly any of us run the TM wide-open. Usually, I'm on 3-3.5 for trolling, and bump it up to 6 or 7 if I am using SI prowling for fish. Give it a try before you pull something bigger.
"Alive without breath, as cold as death; never thirsty, ever drinking, all in mail never clinking."
Make sure you get a 4gauge cross/jumper wire for battery to battery to get the 24v, I got mine from a battery supply store, my factory wire was 6 or 8 small anyway, the 80# terrova tripped the breaker every time if it went close to full power, thanks to Mr Cray and others here the problem is solved
Sent from my iPhone using Crappie.com
crappiemax, "G" LIKED above post
Thanks for the feed back. Hadn't thought about the heavy gauge for the cross jumper. I've got a starting point now.
Sent from my SM-N960U using Crappie.com Fishing mobile app
This might help you decide.
https://www.minnkotamotors.com/sites...938.1519479470
Sent from my iPhone using Tapatalk
crappiemax LIKED above post
If this site isn't the best, I don't know what is. Everyone jumps in to help. Thanks for all the info, I know I can get it done now.
Sent from my SM-N960U using Crappie.com Fishing mobile app
8 gauge will work just fine. I use to use 10 and never had a problem
Fair Winds and Following Seas
Bill H. PTC USN Ret
Chesapeake, Va