Obviously can’t read

[dhaire]

Been over and over the book and cannot find how to change the screen color on my Garmin 1022sxv from amber to blue. When I go into settings I have two choices. Day or night. Maybe my unit does not have that capability? Any thoughts appreciated.


Sent from my iPad using Crappie.com Fishing mobile app

[bighornrmk]

Try this Settings>System> Display>Color Mode or push your on/off button color mode should come on screen

[dhaire]

Thanks anyway. Not the choices available. Appreciate your time.


Sent from my iPad using Crappie.com Fishing mobile app

[Roy]

I have the 93sv plus unit so it is proably different. When I turned my unit on I had to put it in sonar simulator in order to get to the right menu. I then was on the Livescope simulator page, pressed menu, sonar setup, appearance, and then color screen. From here I was able to change to about a dozen diffrent color schemes but I really prefer the amber and blue. Hope this helps.

[dhaire]

I have the 93sv plus unit so it is proably different. When I turned my unit on I had to put it in sonar simulator in order to get to the right menu. I then was on the Livescope simulator page, pressed menu, sonar setup, appearance, and then color screen. From here I was able to change to about a dozen diffrent color schemes but I really prefer the amber and blue. Hope this helps.

I figure my model does not have those choices as I do not seem to have simulator mode. At least I can’t find it on start up or in the manual. Thanks again for trying to help.


Sent from my iPad using Crappie.com Fishing mobile app

[Cray]

Adjusting the Color Mode
Select Settings > System > Sounds and Display > Color Mode.
TIP: Select > Color Mode from any screen to access the color settings.
Select an option.


http://static.garmin.com/pumac/GPSMA...2_OM_EN-US.pdf

Page 12 of 72.

[DOFC]

To change settings for a particular view, you will need to be in that view.....Livescope; 2D; Side imaging.

To get to Simulator.....Press Home Button; Select Settings; Select System; Select Simulator.. When finished, be sure to go back and turn the Sinmulator off.

To adjust color on LS, load Livescope, press the menu button; Select Sonar Setup; Select Appearance; Select Color Scheme.

[DOFC]

To change settings for a particular view, you will need to be in that view.....Livescope; 2D; Side imaging.

To get to Simulator.....Press Home Button; Select Settings; Select System; Select Simulator.. When finished, be sure to go back and turn the Sinmulator off.

To adjust color on LS, load Livescope, press the menu button; Select Sonar Setup; Select Appearance; Select Color Scheme.

These instructions are for the 1022 that isn't touch screen. Hopefully it will help on the XSV model

[dhaire]

Did not work on land. Will try again tomorrow on the water.


Sent from my iPad using Crappie.com Fishing mobile app

[SlabSlider]

Try to call Garmin support.