Thread: My Livescope transducer mounting system

Hey, just a quick question, Dou you not have an issue with your terrova hitting the roller on your trailer when loading and unloading on steeper ramps? I had to put mine on a MKA-51 quck release bracket so I can slide it back 6" when trailering/unloading the boat. I seriously thought I was gonna knock the thing off before I put it on.

I have not had that problem although I have seen it on other people's boats, part of the problem sometimes is how far the trailer is backed into the water. I back mine in until the side bunks are half in/half out, the Terrova doesn't hit the roller.

Originally Posted by Stymie

I'd consider adding the inner and outer handles and the control box and cover. Looks to be about $25 more if ordered from Minn Kota.

Parts

This link is not working. Do you have part numbers for them?

How wide are your gunwales? I think mine are 3", wasn't sure if that transom bracket would fit.

Originally Posted by Stymie

How wide are your gunwales? I think mine are 3", wasn't sure if that transom bracket would fit.

Mine are exactly 3", the bracket opens to 3-1/4".

Originally Posted by Northforker

Mine are exactly 3", the bracket opens to 3-1/4".

Mine are 3-1/4" with the trim insert.

How did this turn out?

Still waiting on parts. I am considering using this battery as a dedicated power source for the livescope system, 30 amp hours, deep cycle agm motorcycle battery. Thoughts?

https://www.amazon.com/dp/B00B9JD7PG...v_ov_lig_dp_it

Thanks to Mark Ridl at Cornfield Crappie Gear for making the brackets and extra large tubing for the livescope transducer cable, i'm confident that the cable is WELL protected.

Man that turned out awesome. There are a pile of people who will really appreciate you sharing the pic's. I set mine up very similar but wish I had seen yours before i did cause you gave me some ideas that I hadn't thought about with the battery and black box. Very nice setup!