Sir, can't do pics. At least not on the web. Too far behind times I guess. I could email some to you if you choose. I have the x3 MG with my Garmin 93 on it. If you look at the clamp on the TM, there is a notch removed from it. Take the clamp loose and lay the ducer wire in that trough. Mount your ducer and run wire up shaft as always. You don't need any slack at this point. After leaving the head, you will want a bit of play in the ducer cable. How you then store the wiring IDK what kinda boat etc you have. Coil the ducer wire in a large loop and stow as far away from any TM power cables, etc as possible. Hope this is of help.