Thanks: 
HaHa: 
Reply With QuoteAnother question is will the XHS 9 HDSI 180T transducer pickup the 2D transducer on the other side of my transom and block out any pictures or will it not be enough to really be a problem?
Crappie.com Legend
HB899ci hd si and AS SI DB Y cable
My question is will it be better to use a AS SI DB Y cable on my HB 899ci hd si as I already have a 2d transducer (XNT 9 20 T) mounted on the other side of my transom. Will it be in my best interest to also raise the XHS 9 HDSI 180T transducer slightly higher from the bottom of the boat to protect it from possible damage. The way I understand this is that the side and down imaging is best running slow speeds about 3-4mph and at that speed the si transducer would be plenty enough in the water to get readings. Thanks for your thoughts on this.
Be safe and good luck fishing
Crappie.com Legend
Another question is will the XHS 9 HDSI 180T transducer pickup the 2D transducer on the other side of my transom and block out any pictures or will it not be enough to really be a problem?
Be safe and good luck fishing
Crappie.com 2016 Man of the Year
* Member Sponsor
XHS 9 HDSI 180 T = ~ $270Originally Posted by scrat
XNT 9 20 = ~ $60
If your lake is prone to damaging xducers hanging off your transom ... $60 is much easier to swallow that $270 ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisorscrat LIKED above post
Crappie.com 2016 Man of the Year
* Member Sponsor
This is a possibility ...but can't really be determined without trying ...
If you have a step transom ... The XNT 9 20 should be mounted under the step anyway (which would put the XNT 9 20 in front of the HDSI) ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
