Reply With QuoteYou mention "followed Navionics install instructions" ...There shouldn't be any type of install for the Navionics Premium region card ... It is plug and play ...
Is this the Navionics + card or the standard Navionics premium region card ...??
Rickie
Likes: 0
Thanks: 0
HaHa: 0
Crappie Wall Hanger II
Humminbird 768 and Navionics issue
I know it's an older model but Humminbird say's it is compatible with Navionics premium........Anyway
Unit has latest update( 6.270 ) If memory serves, Followed navionics install instructions, unit just display's loading chart but never does.
In GPS info screen I can see the card....just never loads.
Any help appreciated
Three can keep a secret................If two of them are dead! (Benjamin Franklin)
Crappie.com 2016 Man of the Year
* Member Sponsor
You mention "followed Navionics install instructions" ...There shouldn't be any type of install for the Navionics Premium region card ... It is plug and play ...
Is this the Navionics + card or the standard Navionics premium region card ...??
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Crappie Wall Hanger II
From navionics website instructions are
Set unit to simulator
verify software version ( i updated unit to latest version )
place chart in unit loading charts will appear
scroll to chart detail level set to all
set map borders to visible or mmc/sd
set spot sounding to visible
I have tried loading from home and on the water, either way just shows loading chart, I restored unit defaults when I did the software upgrade on the unit, unit works fine uni maps works i'm stumped..........
Three can keep a secret................If two of them are dead! (Benjamin Franklin)
Crappie.com 2K Star General
* Crappie.com Supporter
Try the Navionics card in another Humminbird unit to see if it works.
Crappie Wall Hanger II
I will do that....however I purchased this card from a very respected member here and I have no doubt the card is good.
Three can keep a secret................If two of them are dead! (Benjamin Franklin)
Crappie.com 2016 Man of the Year
* Member Sponsor
In addition to what Greg mentioned ...
Try removing the card and then go into the main tabbed menu ...
Under the Chart tab ...:
*Turn off Map Borders ...
*Turn off Spot Soundings ...
This is just more data for the unit to load from the map card that you're probably not going to need to see anyway ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Crappie Wall Hanger II
Thanks I will give it a try...It does seem like the unit has low memory, almost acts like an old computer with limited ram.
Do these units have internal memory like ram? when you reset to factory default does it clear any memory?
Thanks
Three can keep a secret................If two of them are dead! (Benjamin Franklin)
Crappie.com 2K Star General
* Crappie.com Supporter
I don't think that the Restore Defaults menu clears any RAM within the unit as the unit still has to remember the default menu settings. Getting rid of unwanted/unneeded waypoints, routes and tracks though would.
Crappie Wall Hanger II
I'm pretty sure the way points where cleared by the person I purchased the boat from........but I'll check it out I prolly couldnt have afforded the boat ifn I asked him to leave his way points.......
thanks
Three can keep a secret................If two of them are dead! (Benjamin Franklin)
Posting Permissions
