I just installed a new control board in the footpedal on my 2000 model minn kota maxxum 74 lb thrust trolling motor. It is still having the same issue as before. When I push the button I can hear a click and the directional light comes on, but the motor does nothing. Does anyone have any suggestions about what to do next?
I bet you have a wire broken in the head
Step 3.Check to see if lower unit runs properly.A.Connect 12 volts directly to the red and black brush leads at the top of the motor shaft (in the controlbox). The motor should run. If not, a problem exists in the lower unit. Check the lower unit forvoltage at the brushes, water in the lower unit, worn brushes, or an open or shorted armature. Repairas needed. If the motor operates properly, go to Step 4.
Fair Winds and Following Seas
Bill H. PTC USN Ret
Chesapeake, Va