Humminbird | TS3
BTW ... the US2 will only do 2d when the HB TS3 switch is selected to use the US2 ...
You should change the "Transducer Select" menu under the Sonar tab to "Dual Beam" when using the US2 ...
Rickie
Is it even possible to use 2 transducers with a Humminbird 859ci DI HD combo? I installed my 859 on the console & put the transducer on the back but I also want to us my Ipilot U2 on the front but I don't want to install a depth finder up front because of the lack of room. Any info would be much appreciated.
Humminbird | TS3
BTW ... the US2 will only do 2d when the HB TS3 switch is selected to use the US2 ...
You should change the "Transducer Select" menu under the Sonar tab to "Dual Beam" when using the US2 ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar AdvisorHumminbird_Greg LIKED above post
You will need the US2 adapter cable for the HB ...
MKR-US2-8 UNIVERSAL SONAR 2 ADAPTER CABLE-HB 7-PIN | Minn Kota Motors
You may need a HB xducer extension cable ...
Humminbird | EC W10
Humminbird | EC W30
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Also just for info ...
The HB TS3 switch requires 12v power ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor