komos ,I like all in put you guys give,thanks. rickie,i got it from komos,it looks like a 998 ducer
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
komos ,I like all in put you guys give,thanks. rickie,i got it from komos,it looks like a 998 ducer
God Demonstrated his love for us. Romans 5:8
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Gene, there been a lot of interest showing up on the Internet about your rotated transducer.
I've seen were there's at least two others fixing there version of di on a si unit.
I think this is great.its getting other to think about how there units operate and gives them an opportunity to experiment a little.way to go!!!!!!
I want to show two pictures that I have, of the same structure.one is from my onix 10.the other, my 998, with a rotated transducer. .
genec, is the snapshots with a 998c SI transducer tilted 60 degrees? Do you have a picture?
KOMOS BOTH ARE GREAT PIC,BUT THAT ONIX IS THE BEST I SEEN THUS FAR. MY 998 ALWAYS HAD GOOD DI BUT I KEPT SEEING THOSE GREAT PIC THAT THE LOWRANCE WAS GETTING AND I SAID THAT HUMMINBIRD WITH ONE STRAIGHT DOWN DUCER WOULD DO JUST AS GOOD AND I THINK I AM RIGHT. RDJJ,YES IT IS TILTED LIKE THE PIC THAT KOMOS HAS JUST POSTED A FEW PIC BACK.IT IS NOT HARD TO SET UP
God Demonstrated his love for us. Romans 5:8
RDJJ,IF YOU WANT ME TO TAKE A PIC OF DUCER ,I WILL,FORGOT TO MENTION THAT
God Demonstrated his love for us. Romans 5:8
How do you wire it up, are you running 3 XDCRs total??
Split off 2D then one HDSI tilted and one HDSI"regular"??
Pics would be cool.
Robert
Bringer of the 'Bird...
The HB HB TS3 switch allows the use of 2 separate xducer's on 1 head unit ...(the article makes it sound like the switch comes with the DI xducer setup ... But that is not true ... The HB TS3 switch is separate accessory)...
-------------
-------------
The normal oriented HDSI xducer would be connected to the "line thru" leg of the HB TS3 switch ...
The "rotated 60° xducer (or a dedicated DI xducer) would be connected to an additional 2d xducer with the AS SIDB Y cable ...
The AS SIDB Y cable would be connected to the "switch powered" leg of the HB TS3 switch ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor