is there a way to undo the upgrade where I can restore defaults and then do it all over?
USS Intrepid CVS-11 Helicopter Squadron-3 1960-1964
When I keep my gratitude higher than my expectations I have a good day
is there a way to undo the upgrade where I can restore defaults and then do it all over?
"The greatest use of life is to spend it for something that will outlast it".
William James
What I did the first time I upgrade ( I didn't restore the defaults, I didn't know then ) I just restored to default and reloaded the upgrade. I think it worked, but what do I know :p.
I seem to be able to find objects, I can see a jig or minnow and I can see the fish arcs.
But when moving much at all the fish arcs look like long curved lines.
I will get the unit and power up on the bench and get my settings and post them today. Maybe that will help, I may not have mine set right, I just play with it till I get it like I want it right or wrong I don't know :D
Sure will MrDon, I'll take it to work and power up and get a copy of all my settings and post them today.
Yes I sure wanted to come to the MS Camp but the banker and a good customer said I needed to work :D
Look like you and CP had a big time up in Ky last week. (24 more months then maybe I can play :D)
ok, I will try that...
"The greatest use of life is to spend it for something that will outlast it".
William James
Here are my settings and some more information I found on the SwitchFire modes.
My HB 777c2 Settings
Quick Menu or the first menu:
Sensitivity = 10 (so far this has been the best for me)
Chart Speed = 5 (I change this with the speed of the boat if trolling)
Sonar Menu:
Beam Select = 220kHz
Surface Clutter = 5
Switch Fire = Clear Mode (I have played with this some, I think there’s a rule of thumb this is for shallow water, I maybe wrong, I fish 25 ft or less most of the time )
Fish ID = Off
RTS Window = Narrow
Bottom View = Structure ID
Zoom Width = Wide
83kHz Sensitivity = 0
Noise Filter = High 3
Humminbird - Support
Viewing a thread - Ready aim Switchfire from Humminbird
Hope this helps. If ya'll find out I'm doing this wrong let me know. Like I said I just play with it till I get it like I like it, don't know for sure it's right or wrong :D
Well I restored defaults and reloaded the upgrade. Will have to tweek next time on the water.....hopefullly this helps and either way I will post an update.
"The greatest use of life is to spend it for something that will outlast it".
William James
Well, I tried Alan's settings first and they were not a lot different from my settings..I am running the 200/83 transducer setting and his is 200...I saw about the same that I have been seeing so I started changing....
Sensitivity 2-18 in 1 step at a time settings...
Switchfire from clear to max to off....
From auto to manual depth settings....I was in 30' at the deepest so I went to 30' max until I got in 15 fow and would change..I continued to change Sensitivity settings as I changed depth.....
Fish ID( which is a ridiculous & false reading) to manual (arches)..Haven't seen an arch yet from 0mph-4mph... With all those fish showing on FishID you would think I would see one...:D:D:D:D
It is showing brush that is really not there most of the time...At times when we would see a big brush pile & would cast out to see if it was there...It wasn't.
I have fooled with this unit for at least 6 months...I am really disgusted and have no confidence in it..
I am not entirely new to HB or Lowrance as I have had many with no problem setting them up..
USS Intrepid CVS-11 Helicopter Squadron-3 1960-1964
When I keep my gratitude higher than my expectations I have a good day
That's not good you got me thinking mine ain't working right I have seen a few arches but I'm now thinking they may have not been true as with your brush piles
But I'm sure mine show brush piles good, I lose enough hooks and jigs in them :D
You going make me go spent some money another unit :p