thats purdy, who did you have make your custom mold? ive talked to two fellas about such work, and they said they would get back to me but........crickets
Doing A core shot is very time consuming I will give you step-by-step instructions in the pictures below we were using brazing rods cut to the right length for the cavities this method may not work for all molds and of course the brazing rods may be thicker one way or the other depending on the mold that you use after they are cut to length and you get the right size before you place them in the mold you're wanting to oil them so the bodies will slip off the mold that you will see in the pictures is a custom-made one of a kind it is the most expensive mold I ever bought it can't be duplicated.
Step one placing the rods in the mold getting ready to shoot.
Step two after shooting pull the pins out of body in replays in mold.
Step three after replacing the bodies back in the mold you were getting ready to shoot your center color.
Here is the finished plastic in a core shot.
thats purdy, who did you have make your custom mold? ive talked to two fellas about such work, and they said they would get back to me but........crickets
Very nice Bob. Helps us appreciate your hard work even more. Very pretty jig.
snake River LIKED above postshipahoy41 thanked you for this post
That is awesome my friend. Your work is awe inspiring. You are a teacher and a blessing to all who read AND APPRECIATE your posts. Whenever you have time shoot me a PM on where I can get my hands on about three of those pins. Is it possible to just find a small metal drinking straw and just hacksaw it to length?
Mike
Aquatic Species Removal Engineer.
May God be with you. Keep CALM and STAY ANCHORED with your faith.
Mike you can go and use all metal coat hanger’s to also but you have to cut them to fit your mold the stuff that I used is brazing rods and I use a pair of bolt cutters to cut them to length.If you were wanting a couple of rods to cut up let me know and I will send you some
I would appreciate one or two. Thanks. It might be good to experiment with. I painted 70 two tone eye balls on jigs today using the fingernail polish and drill bits method I texted you. I topped it off with some clear and they are awesome.
Mike
Aquatic Species Removal Engineer.
May God be with you. Keep CALM and STAY ANCHORED with your faith.
Aquatic Species Removal Engineer.
May God be with you. Keep CALM and STAY ANCHORED with your faith.
snake River LIKED above post