Likes: 
HaHa: 
Reply With QuoteI will try that next time. Thanks.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Trophy King
try turning it upside down, and tilt it at a 45...pause a couple seconds to let it settle, then push your plunger. you will see air bubbles coming out before the solid stream.Originally Posted by JKR06
Keeper
Crappie.com 2010 Man of the Year
* Crappie.com Supporter * Member Sponsor
Here is that picture of a plastic bait that you been trying to shoot the baby shed this is using MF floating plastic.
www.bobsjigs.com
Keeper
I am still getting some bubbles. It like at least in 2-3 baits per 10. They are getting smaller though so maybe I'm slowly getting there.
Trophy King
are you just shooting 1 mold? if so, do the upside down injector purge, and when you inject, SLOW and easy. if you push too hard, you will create turbulence that can leave bubbles. make sure your injector is full...if shootin one mold i will assume there would be enough plastic in a 4oz injector to fill it. the injectors have a "sweet spot". you purge the air, shoot what you can...but the last bit of plastic will have air in it as well. you want to shoot with the "middle" of your injector load, not the ends...if that makes sense.
Trophy King
i think this one has got us all to start, bob. we should start some kind of a support group or something
http://www.H2oHammer.comsnake River thanked you for this post
Keeper
Yes, just 1 mold. So once I fill the injector turn it upside down then right side up squirt a little out to get solid plastic going then squirt into the injector?
Trophy King
no no, you squirt some out with it upside down at a 45. when you see a solid stream which should come soon, like in the first inch or so of pushing, then flip it over and shoot.
Crappie.com 2010 Man of the Year
* Crappie.com Supporter * Member Sponsor
That sounds like a good idea this is the perfect place to discuss our different issues with our problems that we are having shooting plastic.
www.bobsjigs.com
Crappie.com 2010 Man of the Year
* Crappie.com Supporter * Member Sponsor
it seems like when I got the baby Shad mold that I was having problems with the one of them was that the mold was too cold but I do not have any issues with that mold anymore matter-of-fact I wish I had to three more of them I had brick building the 40 cavity may be shed stinger I wish I would have kept that mold but I sold it at particular plastic bait is still very popular I don't know how many hundreds of them that I have made up but a lot of them keep working with it you'll get there sooner or later.I am still getting some bubbles
www.bobsjigs.com
