does anybody know how to marble plastic.

**snake River** · 10-05-2011, 06:20 PM

guys we are hunting ways to marble are plastic the put swirls into our plastic baits I know there are many different ways to go about this but we would like to hear from you guys out there that have maybe tried it and also has anybody tried to scale on their plastics and also would like to know if anybody has airbrushed plastics.

**baitman** · 10-05-2011, 06:51 PM

marbling can be done with a 2 color injector alternating pressure on each injector while turning the blending block. I have done a good bit of it. It tkes a feel to get it down. just a little pressure on each one.

scales I have done on 5 inch swim baits and it aint much fun. On small baits you need very small mesh to make it look right and its pretty time consuming to do it and make it look good, it needs to be dipped after to seal it.

**snake River** · 10-05-2011, 07:21 PM

Originally Posted by baitman

marbling can be done with a 2 color injector alternating pressure on each injector while turning the blending block. I have done a good bit of it. It tkes a feel to get it down. just a little pressure on each one.

scales I have done on 5 inch swim baits and it aint much fun. On small baits you need very small mesh to make it look right and its pretty time consuming to do it and make it look good, it needs to be dipped after to seal it.

thank you Keith this is good information Keith have you used bears blending block.

**baitman** · 10-05-2011, 07:23 PM

no I havent but they are pretty much the same, his has a hinge on it but other than that there is no difference

**crappieseeker** · 10-05-2011, 07:35 PM

that is the only way I have heard of it being done in the past was with a twinjector, it seems like I saw eitehr a video or a post somewhere about it about a year ago. I have never tried it myself.

**snake River** · 10-05-2011, 08:12 PM

Originally Posted by crappieseeker

that is the only way I have heard of it being done in the past was with a twinjector, it seems like I saw eitehr a video or a post somewhere about it about a year ago. I have never tried it myself.

good to see you back on.

**crappieseeker** · 10-05-2011, 08:40 PM

snake I will only be on for a couple days, then back off again. trying to save all my files so I can reformat and get my computer running more efficient before I have to switch to dial up internet. So i will be offline again soon for a while

**shipahoy41** · 10-06-2011, 06:32 AM

Originally Posted by baitman

scales I have done on 5 inch swim baits and it aint much fun. On small baits you need very small mesh to make it look right and its pretty time consuming to do it and make it look good, it needs to be dipped after to seal it.

Keith,

If you are only doing a few for yourself to fish with, would this goofy idea of mine work? Just wondering. Could you just take a pair of your wife's stockings and cut out a 5" x 5" square out of it? Take some black spray paint and spray the stocking. Then lightly touch it to your plastic bait and seal the pattern in clear plastic dip? You can answer here or just shoot me a pm. Thanks.

Mike

**baitman** · 10-06-2011, 08:26 AM

I dont think you will like the results, the mesh needs to go over the bait then sprayed. The paint will go threw the mesh, transfer of the paint from the mesh will come out more solid

**snake River** · 10-06-2011, 11:05 AM

Originally Posted by baitman

I dont think you will like the results, the mesh needs to go over the bait then sprayed. The paint will go threw the mesh, transfer of the paint from the mesh will come out more solid

Keith is right .

Thread: does anybody know how to marble plastic.

Thread Tools

Display

does anybody know how to marble plastic.

Posting Permissions