OMG grub you know how to type for real....first time i could under stand and read everything you said....lmao....j/k
One would think to keep out air bubbles to lessen the inclusions in your mold"That you would want to pour resin slowly into one corner of said mold and allow the resin to cover slowly and one might use the bomber method of allowing the resin to pour in from about 2 to 3 feet from above again into one corner"this will allow the mold to be free of all bubble inclusions and make for a more professional finish.
just my $0.02
"WELL"...YOU ASKED"NOBODY TELLS ME NOTH'N!!!
OMG grub you know how to type for real....first time i could under stand and read everything you said....lmao....j/k
Bluff City Tackle Pro Staff
Touranment Ice & Minnow Ice
Culprit Pro Staff
Outlaw Crappie & Walleye Poles Pro Staff
I flyfish a lot for bream. I use a little 3" worm with a small two hook harness for the worm. I use to buy my plastic from Herter's. The only color I would use would be red. I would open te can of Playdo, spread it out with a roller til it would be about 1/4 to 1/2" thick. Get a little 3' worm, press it down into the Playdo til it would be flush to the top. Take the worm out and make another right next to it. I would make about 5 to 7 little molds , pour the plastic and the color. Let it set about 2 minutes. Take them out and pour another batch. I would have a dozen in no time. Roll the Playdo in a ball, put it back in the can till next time. Just for my use and no mess at all.