Reply With QuoteAnother thing you need to do if you are planning on making a square matt is throw our 4 bouy markers to mark each corner and this will give you some parameters of where you have driven and want to drive stakes
Likes: 0
Thanks: 0
HaHa: 0
Slabmaster II
Stake Bed Method
I have my stake driver built. I have my stakes cut. What is the best method to control the boat while driving the stakes in the bottom of the lake? I figure to anchor both the front and back of the boat. Drive the first row of stakes in the bottom of the lake. Let out 1-2 ft. of anchor line at the front and back of boat and then drive the second row of stakes. Repeat the process until the desired size of stake bed is achieved. Does anyone else have a better method?
Slabmaster
Another thing you need to do if you are planning on making a square matt is throw our 4 bouy markers to mark each corner and this will give you some parameters of where you have driven and want to drive stakes
Crappie.com 1K Star General
never tried that method before--let me know how it works out
Get the net!
Slabmaster
Good idea, I need to make some bouys as they are pricey
Originally Posted by catchin30
God Bless America
In God We Trust
Banned
I got some pics of the high court Judge placing them.Didnt know what he was doing at the time.
We get out in low water and drive with post drivers
Crappie.com Legend
Todd did you get them beds drove in?
If so don't forget where there at. and we will fish them.
Good luck. I have thought about building a bracket in my boat. That I can drop a 2" pipe down through. And use one in front and back to hold the boat in place. May have to give it a try.
Pete
Posting Permissions
