All you feel like Making&as manny spots as you have Condos for. The more the better & good fishin----------mike
Hey Guys
How many pvc structures (cement block type) do you normally put at a location?
Thanks,
K9
All you feel like Making&as manny spots as you have Condos for. The more the better & good fishin----------mike
this is a good question. I like to do it 2 ways. 1 way is to place one or 2 next to or near something above the water so you don't have to use a gps to get back to it...You can hit it and run...The 2nd way I like is open water. We toss out 3 buoys (this way you never lose your set-up location) and get the tops in a pattern or line or whatever you want. If they're less than 7 feet tall I like to place 4-6 in a location. If they're those tall bad boys that my buddy builds (10 footers) 3-4 will work. When then mark all of locations, and at each location I take multiple waypoints over the area. That way if you're gps is off one day, you come thru the middle of the waypoints and you should find it on your fishfinder.
Remember this...The more tops in one location the easier it will be for someone else to find them on their fishfinder.
I make some with 5 gallon buckets and 3 gallon buckets. Put about 10 to 12 pieces of PVC in the 5 gallon buckets and put about 4 to a spot spaced out about a boat length apart. The smaller ones have 4 to six pieces in them and have put out as many as 20 on one spot. Put the ones in open water out in a square formation. Put ones out on a ledge on a river channel in a T formation with part of the formation going down the drop off. Also mark about 4 waypoints on gps and go through the middle of them when getting back on stucture. this will put you back on it everytime. CFOriginally Posted by K9jones
The Original Woodsgoat Hater
2011 NWR Bash Yellow Perch Champion