swap livescope between boats - Page 2 (crappie.com)
You can see the mount I made for my jon boat. On my skeeter I ditched the pole and just attach to the TM shaft. On skeeter wires are routed through bow access plate and runs to a batt in one of my rod lockers. Head unit is mounted with original gimbal on the floor.
LadyBear thanked you for this post
Can you give more detail on the quick connector. Thanks
I used these , just cut off one end and solder on flat blade connectors for battery . They will allow you to plug into charger or unit . Just make sure and wire polarity correctly .
https://www.amazon.com/Gauge-Disconn...s%2C212&sr=8-2
Moderator of Beginners n Mentoring forum
Takeum Jigs
Thanks for the info
Nimrod .... still liking that Amped 32?
Last edited by Crappieawlogist; 09-27-2021 at 10:20 PM.
I have the Amped 14.8 volt 48AH running black box and a 126SV. Fits in small, plastic ammo box and I never worry about the second 10 hour day of fishing with a single charge. And I dont worry about the aerator running in the well all the time keeping fish fresh and cool all day with a single crank battery now that I have the front electronics isolated.
Prob the best money I have spent.
FYI Amazon has Ampere time Lithium 12 Volt 50AH batteries right now for $199 and they're built just as good as whoever is building Amped batteries. These also have real terminal bolts. No flimsy spades like the amped or worrying about breaking one off.
Amazon.com
Last edited by Hammmerhead; 09-28-2021 at 02:15 PM.
BuckeyeCrappie, NIMROD thanked you for this post