Thanks Thanks:  0
HaHa HaHa:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Double Anchors????

  1. #1
    Join Date
    Nov 2019
    Location
    Walnut Ridge, AR
    Posts
    227
    Post Thanks / Like

    Default Double Anchors????


    So I've been thinking about my fishing trip yesterday and trying to find something I could have improved on.... I was fight some wind and current. So I would have to skull up against the current and into the wind to get into the right position to drop my jig. I'd catch a fish then lose my position while taking the fish off the hook. I'm wondering now what would have happened if I would have used double anchors (one off the front of the boat and one off the back to hold my position so I didn't have to paddle back after each catch.

    What has your experience been? Will the anchors spook the fish and ruin the hole you're in?

    Thanks

  2. #2
    NIMROD's Avatar
    NIMROD is offline Crappie.com Legend - Kids Corner Moderator
    Join Date
    Jan 2005
    Location
    Plainview, / Russellville , Arkansas
    Posts
    16,776
    Post Thanks / Like

    Default

    Never use anchors my self
    Moderator of Beginners n Mentoring forum
    Takeum Jigs

    Likes 1187mg LIKED above post

  3. #3
    Join Date
    Jul 2018
    Location
    North Carolina
    Posts
    32,091
    Post Thanks / Like

    Default

    I've never had an issue using one anchor and spooking fish. I have wondered if using two would help but usually if wind/current that strong I usually find another location either out of wind or tie off to something like tree or bridge.

  4. #4
    Join Date
    Jan 2014
    Location
    White Co, Arkansas
    Posts
    280
    Post Thanks / Like

    Default

    I used a double anchor set up like you describe when stationed in SW Oklahoma. The wind never stopped blowing there. I would go upwind of the spot I wanted to fish so the spot was at least 20 yards behind me, then I would drop anchor #1. Next I let the wind blow me over the brush pile and pay out line until I was past the brush pile about the same distance and would drop anchor #2 but I did not tighten the line, instead I would pull myself over the brush pile with #1 make it fast then snug up anchor #2. When done right the boat was over the brush and with enough anchor line out there was no anchor slipping.

    Way easier than it sounds and if done correctly you can sit over the structure all day.
    Likes SuperDave336, theygotaeat LIKED above post

  5. #5
    Join Date
    Nov 2019
    Location
    Walnut Ridge, AR
    Posts
    227
    Post Thanks / Like

    Default

    Quote Originally Posted by SuperDave336 View Post
    I've never had an issue using one anchor and spooking fish. I have wondered if using two would help but usually if wind/current that strong I usually find another location either out of wind or tie off to something like tree or bridge.

    When you tie up... Do you let the the rope lay on top of the water? I always wonder how spookier the fish are... anchors, rod tips touching the surface, knocking the paddle up against the side of the boat etc

  6. #6
    Join Date
    Jul 2018
    Location
    North Carolina
    Posts
    32,091
    Post Thanks / Like

    Default

    Usually the rope is inside and not laying on the water. I always hate making noise on the water.

  7. #7
    Join Date
    Nov 2019
    Location
    Walnut Ridge, AR
    Posts
    227
    Post Thanks / Like

    Default

    Quote Originally Posted by Pac in Arkansas View Post
    I used a double anchor set up like you describe when stationed in SW Oklahoma. The wind never stopped blowing there. I would go upwind of the spot I wanted to fish so the spot was at least 20 yards behind me, then I would drop anchor #1. Next I let the wind blow me over the brush pile and pay out line until I was past the brush pile about the same distance and would drop anchor #2 but I did not tighten the line, instead I would pull myself over the brush pile with #1 make it fast then snug up anchor #2. When done right the boat was over the brush and with enough anchor line out there was no anchor slipping.

    Way easier than it sounds and if done correctly you can sit over the structure all day.
    Perfect!!! So my anchor lines need to considerably longer than water depth, right?

  8. #8
    Join Date
    Jul 2018
    Location
    North Carolina
    Posts
    32,091
    Post Thanks / Like

    Default

    I use paracord. 50' or 100' doesn't take up much space.

  9. #9
    Join Date
    Jan 2014
    Location
    White Co, Arkansas
    Posts
    280
    Post Thanks / Like

    Default

    Yes the ropes need to extend a ways from the boat. Trial and error will show what will work best for you. The more wind the more chance of the anchor slipping and a longer rope will stop the dragging anchor. The back anchor rope's length isn't as critical but if too short the anchor can bob up and down and mess up you precision anchoring. You don't want either anchor in the brush pile, more like several yards on either side of the brush pile.
    Likes NIMROD LIKED above post

  10. #10
    Cray's Avatar
    Cray is offline Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum * Crappie.com Supporter
    Join Date
    Oct 2010
    Location
    Byhalia,Mississippi
    Posts
    17,388
    Post Thanks / Like

    Default

    If I was fishing fairly shallow water this is what I would get and build brackets for side of boat. Lots of DYI on YouTube for building different versions pretty cheap.
    https://www.walmart.com/ip/Ecostake-...129382&veh=sem
    Proud Member of Team Geezer
    Charlie Weaver USN/ENC 1965-1979



    Likes "G", NIMROD LIKED above post

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP