Name: 20190508_131142.jpg Views: 626 Size: 64.3 KBName: 20190508_131123.jpg Views: 666 Size: 61.1 KB Tried mounting on t/m, did not like turning motor to see direction.Mounted beside seat using large Ram mount,2ft. of 1 1/4 pvc, 3.1/2 ft. 1 in inside of 1.1/4 with nipple glued 8 inch above top 1.1/4 to keep from sliding down. drilled holes through inside pipe to set depth, and glue elbow to top to point direction. some have made fun of it, but all I bought was the 2 clamps to tie pvc to Ram mount. loosen mount, turn leg up and hauls above top rail. to move from pile to pile, pull pin slide up and re pin. hope someone can use this.