Thanks Thanks:  0
HaHa HaHa:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Spider Rigging

  1. #1
    Join Date
    May 2014
    Location
    Arkansas
    Posts
    2
    Post Thanks / Like

    Default Spider Rigging


    Hello Folks!First post here.I joined up looking for some info...I'd like to start spider rigging...I have a 15' alum boat set up for 2 folks side by side in the front.I have ordered some Hi-Tek rod holders.My question in... Rod length?!?12' seems easier to store...Most say I would be happier with 14' rods.I typically fish lake Conway and Nimrod, but would REALLY like to start fishing Dardnelle.Can you guys give me your opinions of rod lengths and why?Thanks a lot!George!

  2. #2
    Join Date
    Jan 2009
    Location
    Eustis, Fl
    Posts
    5,702
    Post Thanks / Like

    Default

    I have 12' just started using two 16' out front.....happier with the 12's.......just my opinion. 14' might be a good alternative. Probably not much help but Good luck!

    PROUD MEMBER OF TEAM GEEZER and
    SBF
    authorized by: billbob and "G"
    aka: Baconator

  3. #3
    stormcloud's Avatar
    stormcloud is offline Crappie.com 2K Star General * Crappie.com Supporter * Member Sponsor
    Join Date
    Jan 2014
    Location
    arkansas
    Posts
    2,709
    Post Thanks / Like

    Default

    I run 8 poles, 4 to a side. I use 14s in the #1 and 4 positions. and 12s in the 2 and 3 position. It gives me a wider profile and also gives me more even spacing in the water. I've gone thru a lot of brands and the Capps & Coleman 143s by B&M are my favorite 14s. The 12s are Capps & Coleman 122s. When landing a fish the poles have the same feel. The ones you should buy are the ones you like best.
    Tell'em I'll be there.

  4. #4
    Join Date
    Jan 2011
    Location
    Fayetteville, Ar.
    Posts
    879
    Post Thanks / Like

    Default

    One thing to think about when spider rigging from a smaller boat is wave action. I spider rig from a 12' kayak and 10' to 11' poles is as long as I want to use because the wave action makes the poles bounce. These guys you see with 18' to 20' boats can use 14 and 16' poles because their boats are more stable. Just something to think about in a 15' boat
    Mike Barnett
    Likes Fosh LIKED above post

  5. #5
    Join Date
    Mar 2010
    Location
    Arkansas
    Posts
    930
    Post Thanks / Like

    Default

    i'd guess a bunch of 12' poles would get tangled up just as good as a bunch of 14' poles. Get after it!

  6. #6
    Join Date
    Apr 2011
    Location
    Northeast Michigan USA
    Posts
    3,223
    Post Thanks / Like

    Default

    We have a 16' Starcraft and we use 6- 12' rods my boat bounces around a lot in traffic and the rod tips bounce up and down. I would think with 14's that would be worse. I'm happy with my 12's. Just Sayi'n


    Proud Member Of Team Geezer
    Member: Michigan Chapter of Team Overalls

  7. #7
    Join Date
    Oct 2009
    Location
    Arkansas
    Posts
    1,321
    Post Thanks / Like

    Default

    A lot of people start with 12s and end up with 16s. I think the further away from the boat the more bites? I use 16s. Good luck.

    "I just can't fish with one pole anymore"
    Black Fish Crappie Charters
    www.blackdoghuntingclub.com

  8. #8
    Join Date
    Aug 2009
    Location
    arkansas
    Posts
    4,358
    Post Thanks / Like

    Default

    Welcome from Cleveland county home of meatgetter jigs and minner critters! !!! I have two sets 14 & 16 they both have there place! !!!! 14ft B N'M bgjp for the light bite in the winter and the 16ft lews for larger weight and faster speed in warmer water! !!!
    Pro Staff:
    Excel Boat (Meatgetter Edition)
    Crappieholic Apparel
    Hi-Tek Stuff
    Ozark Rods

    Please support these great companies!

  9. #9
    Join Date
    May 2012
    Location
    Cabot,Arkansas
    Posts
    4,237
    Post Thanks / Like

    Default

    I fish out of a 15' ft flatbottom and I only use 14 ft rods for riggin. The extra length really helps when fishing shallow(10ft or less) to get the baits out a little farther from the boat. This helps prevent two things, less chance of spooking fish, and keeps your lines out of the trolling motor. As for the thing about the wind bouncing your rods, there are ways to adjust for that. Some people add more weight when the wind picks up. This supposedly acts as a shock absorber on a light rod and minimizes the rod bounce. The other way is to go the opposite, use light weight on slightly stiffer rods to minimize rod bounce in windy situations. The real serious guys may even have two sets of rods, and choose which ones to use based on the conditions and the bite. Best thing to do is get in the boat with some guys that spider rig and get a feel for the different setups and styles, and see what works best for you. If not, it is likely you will end up buying several different setups before you find what you like. Just my two cents.
    ><}}}}*> (C.J.)

  10. #10
    Join Date
    Aug 2009
    Location
    Conway, AR
    Posts
    2,849
    Post Thanks / Like

    Default

    Welcome to the board from Conway, home of the beautiful and scenic Lake Conway.
    My wife keeps saying I never listen to her....... or something like that!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP