Pvc Leader Holder

[bigfish5]

THIS IS HOW I KEEP MY LEADERS STRAIGHT AND SAVE TIME RE-RIGGING.
I CUT A PIECE OF 3IN PVC SCHEDULE 40 PIPE ABOUT 40" LONG. MARK THE END WITH A SHARPIE.

[bigfish5]

I MARK EVENLY AROUND THE PIPE WITH THE SHARPIE. THEN DRILL OUT WITH A 1/8TH DRILL BIT.

ATTACH SOME ELASTIC THROUGH THE 1/8 " HOLE. ATTACH A BEAD INSIDE THE TUBE TO HOLD.

[bigfish5]

HOW IT SHOULD LOOK ON THE OUT SIDE

[bigfish5]

MARK THE OUTSIDE OF THE TUBE EVERY 4"

DRILL OUT THE HOLES. I DRILL A 1/8 " HOLE , THEN REDRILL A 5/16THS HOLE, THEN REDRILL A 3/8THS HOLE.

[bigfish5]

HOW THE HOOK LOOKS ON THE TUBE.

HOW THE SWIVEL LOOKS ON THE HOLDER

I HOPE THIS HELPS SOMEONE AS MUCH AS IT HELPS ME.

[bigfish5]

FINISHED LENGTH 40 " HOLDS LOTS OF LEADERS . KEEPS THEM STRAIGHT AND UNTANGLED. SAVES LOTS OF TIME RERIGGING.

[poppop]

thanks....

[yankee doodler]

just what I need on these cold Michigan days...somethin' to keep me busy until ice out. Gonna have ta make me one o them. Thanks.

[bigfish5]

I Am Thinking About Folding Up A Piece Of One Of Those Noodles And Sticking It Inside The Tube. That Way It Would Float If It Blew Out Of The Boat Driving Down The Lake.

[waterboy1]

Why not just use a long section of pool noodle and T pin the leaders to the side? Seems like a lot less work.