Anybody have any pics that show your boat's spider rigging? I noticed some time back a picture that showed a neat u-bolt rig for holding rods while in transit too, any ideas? Yep, a green-horn here so I need all the help I can get to set up my '03 Tracker boat. Thanks in advance for your tips!!!!
Last edited by papasage; 12-26-2007 at 01:50 PM.
retired and now i will always fish
I've been setting my boat up all year long a little bit at a time. I do not have any pictures right now but i will get some and send them your way. I did make some mistakes along the way. If you have any specific questions let me know.
Good luck
Brush Buster
http://www.crappie.com/gr8vb3/search...earchid=407495Originally Posted by sbennett
... cp
This is what i use, 1 in. alum. square tubing and 9 in pvc. Whole rig wt. 6lbs. It drops in holders in boat deck. Can be set up with 7 poles in about 10min. have less than $20 in whole rig including cup holder.
PROUD MEMBER OF TEAM GEEZER
Ok, I have a foot controlled trolling motor and a depth finder mounted on the front of my boat. Do I mount the Tite_Lock forward toward the front or better mounted back toward seat? I have a '03 17.5 Tracker boat. I want to avoid being too cluttered with depth finder and trolling motor and it seems plausable to want access to poles as close as possible to seat but not too far from front of boat. HELP!!!!!!
This is my Spider Rig with everything in place. I just put a new trolling motor on so I have to adjust the rod holders, but there is plenty of room to operate. I have a 2003 Tracker ProCrappie.