Here ya go
Note:
I suggest using a dedicated separate MMC/SD card for this function.
Ozzie
1. Open Ozie and load your desired (existing) waypoints . The ones you want to get from Ozie to your Humminbird.
2. goto file
3. goto save file as
4. goto Export to GPX file
5. click it (opens new indow)
6. give it a file name and save it(gpx file) in my documents
This creates a GPX file in My Documents
MMC/SD Humminbird
1. Place MMC/SD card in card reader
2. open Humminbird PC program
3. click manage waypoints and tracks (opens new window)
4. goto file click import merge
5. this opens new window (my documents), highlight the new gpx file you created in Ozie and click it
6. click open
7. this should put the waypoints in the Humminbird program file and you should see the waypoint column displayed
8. click transfer tab
9. click toMMC/SD
10. select MMC/SD drive letter (if asked)
11. click ok
This should put the waypoints on the mmc/sd card (it creates a folder called matrix). This is a special folder for Humminbird, not a waypoint file, but it contains waypoint data.
1. Power off unit.
2. Remove the map card (if you have one installed).
3. Put the MMC/SD card in the unit.
4. Power up unit. It will then upload these waypoints.
5. Power off unit.
6. Reinstall map card.
7. Power up unit and verify waypoints.
Last edited by Cane Pole; 12-07-2007 at 03:33 PM.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"