I think that your best bet is going to be "Barlow's Tackle". They have just about anything that you will need.
Whats a good site to get equipment for pouring my own jigs. Im gonna need a melter and some 1/16 and 1/8 molds. I can buy the jigs around here but it seems everytime i need them they either dont have them or the barbs on them are not up to par. So im gonna give it a go myself.
Its all about how ya wiggle it!
I think that your best bet is going to be "Barlow's Tackle". They have just about anything that you will need.
Forgot to also tell you that if you have any problems PM me and I will try and help you out. I used to own my own jig business.
These people have everything you need. http://www.barlowstackle.com/Originally Posted by taylmatr
Fair Winds and Following Seas
Bill H. PTC USN Ret
Chesapeake, Va
I buy from DO-IT MOLD COMPANY.
THE BANDIT
1 Corinthians 2:2.----Nothing else counts!!
"This one thing I know, and that is Jesus Christ and Him crucified."
I use a no.2 on 1/16 and a no.1 on 3/32. That sells good here in west central Arkansas. Some like big hooks and some like little hooks and the rest of us use medium sizes. 1/0 is not much bigger than a no. 1.
TT
I keep a stock of jig heads with #4, #6 & #8 hooks for both of that weight jig. I probably don't really need the #8 in 1/8, but I have them.Originally Posted by taylmatr