bump
I'm hoping to be able to get by with the Medium 6'6" rod so I won't have to buy a lighter one. Question: will the Grizzly reel below be big enough for a rod like this? If not, what reel do you recommend?
https://northwoodsoutlet.com/product...trolling-reel/
I don't use crankbait reels, but I have saw this one mentioned a lot on here. This company also has a larger version.
I have never used that reel so I can't really speak to it. Are you wanting to pull cranks or cast? If you are pulling cranks as long as it has enough line capacity and is smooth I don't see why it won't work.
The reel you are showing will be fine if you just using to let line out and retrieving for spider fishing or possibly long lining and most of the time they are used on long 10 to 16 foot rods(poles). But it will not be any good in my opinion for casting , especially using light jigs. Now this is just my opinion and I am not the best with any of these type's of cast reels but the ones with a big thumb bar are better. I just hate the bird nests they make.
Be safe and good luck fishing
[QUOTE=ET Fish;3381788][url]https://northwoodsoutlet.com/product/shakespeare
Would this rod/reel combo be overkill for pulling cranks? I'm not interested in casting with it-just trolling cranks.
[QUOTE=nccater;3381803]If you're asking me, I really don't know. I am more of a single pole guy, that really needs to diversify his tactics! That being said, my understanding is that when trolling, the line counter feature is important to return to the same amount of line out. I have pulled cranks a few times and had some success. I just don't have the best setup. Big motor is too fast and trolling motor is too slow!
Thanks for the input guys. I talked to Grizzly Jig earlier and they said that reel would work for that rod. I'm not worried about the line counter because I'm using the Depth Hunter color braid, so I know how much line i'll have out. Thanks again.
Rod length would be fine for "pulling" cranks (off side or out the back), but probably wouldn't be an adequate length for "pushing" cranks (out the front/over the trolling motor). IMHO
The reel should do OK !!