HaHa HaHa:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Ultralight DropShot Rigs

  1. #1
    Join Date
    May 2019
    Location
    Kentucky
    Posts
    156
    Post Thanks / Like

    Default Ultralight DropShot Rigs


    Hi all,

    Been a while since I’ve been around here, and havent really fished a whole lot in the last year and a half or so, but I havent stopped all together.

    I thought I’d jump back into it and share my drop shot rig I have tied on nearly every time I hit the water, it has been so successful for me the last three or four years its unreal, on top of being super versatile.

    First off, there’s nothing terribly fancy about it, in its entirety it’s just a normal drop shot rig, the little bit of magic in it is with the hook/swivel connection. I use Gamakatsu Open-Eye Siwash Hooks (size 10 or 8 primarily, but have them pre rigged up to 1/0) and close the eye over a VMC rolling swivel. This allows the user to have a swivel in the rig, right at the hook to prevent line twist without having excessive knots in the whole thing.

    Name:  IMG_4733.jpg
Views: 367
Size:  68.0 KB

    If you’re using fine diameter braid (Suffix Nanobraid or Varivas Infinity for example) having the swivel is less important because line twist doesn’t affect these lines as bad as a fine diameter Fluorocarbon (Varivas Ajing Master Blue is my current favorite) which will turn into a mess real quickly on you.

    Using the siwash/swivel rig I have tied direct to to swivel eye with my braids and never felt like I’ve left anything on the table catching wise; as long as you use a nylon mono dropper for the weight side of the swivel that is lighter test than the braid. The weight is the sacrificial piece here. Losing a premium VMC rolling swivel and Gamakatsu siwash hook to a rock hurts the wallet!

    I began this journey with 1” gulp minnows and have caught 1000 or more fish on them since starting this method in 2019, they’re great, but messy, smelly, and as durable in the water as cotton candy.

    For other, more durable options I have more recently switched to the 1.75” Eurotube from Eurotackle, the Micro TRD from Zman, TRD Ticklerz Micro from Zman and a Hive Manta from Lunkerhunt with great success, the Eurotube being the clear winner here, it is dense, solid and have a bit of scent that’s perfect.

    This year I began tying rabbit strip minnows and leech patterns on these hooks and had incredible success as well, this is the ultimate in durability and re-fishability.

    Name:  IMG_4734.jpg
Views: 349
Size:  68.8 KB

    I rarely use any weight heavier than 1/8 oz, down to 30’ feet on the bottom unless it’s VERY windy, or im below one of the big dams around here in the current, I may go up to 3.8, but 1/4 is usually enough due to the small diameter of the line Im using being able to cut the water so well. I will actually switch away from my beloved Nanobraid and favor the sinking nature of the 3 or 4 lb fluorocarbon when in the heavy current.

    Name:  IMG_4735.jpg
Views: 360
Size:  68.8 KB

    This particular rig I feel like my 6’10” Lunakia was made for, 99% of the time I have that rod in my hand its got a DS rig on it. I love the Lunakia so much with this drop shot rig, I have scaled it up 2 more times! I have the 7’5” and now the 8’2” models for fishing big water/big fish. I dont use the 755 or 822 model quite as much with drop shot rigs from the boat as they’re just really long, but from the bank they’re great. But, one does not need a rod like the Lunakia to have success with the DS rig for ultralight fishing, any rod with a relatively fast tip and a bit of backbone with be fine, just take care not to overload any solid tip model rod with the weight.

    I mentioned versatility of the rig. I’ve fished this rig in the spring for bedding bluegills in 2’ feet of water down to 30-40’ in the river channel edges for whites and one particularly angry stripper I only got to see once. I’ve fished this rig in Mississippi River oxbows and caught gar, the canals around NOLA for tropical escapee cichlids, smallmouth on the other end of the Mississippi up near Lacrosse, and lots of places and fishes in between. The only thing needed to vary is the weight and the length of leader line between the weight and the swivel.
    Thanks SpeckledSlab thanked you for this post

  2. #2
    Join Date
    Jul 2018
    Location
    North Carolina
    Posts
    32,152
    Post Thanks / Like

    Default

    Good write up and technique. Thanks for sharing
    Likes SpeckledSlab LIKED above post

  3. #3
    Join Date
    Sep 2012
    Location
    Dayton Tennessee
    Posts
    40,009
    Post Thanks / Like

    Default

    Thanks for sharing the knowledge
    The love for fishing is one of the best gifts you can pass along
    Likes SpeckledSlab LIKED above post

  4. #4
    Join Date
    Feb 2005
    Location
    Southeast,Va
    Posts
    5,186
    Post Thanks / Like

    Default

    very nice, thanks for sharing
    Likes SpeckledSlab LIKED above post

  5. #5
    Join Date
    Mar 2010
    Location
    Georgia; South of the big A
    Posts
    2,682
    Post Thanks / Like

    Default

    I’ve had good luck using an UL drop shot rig at the town pond , but when I tried it at the big reservoir, I get hung up and loose my rig too much to make it effective.
    “ The bigger the Bend , the Wider the Grin ! “
    Likes SpeckledSlab LIKED above post

  6. #6
    BuckeyeCrappie's Avatar
    BuckeyeCrappie is offline Super Moderator * Crappie.com Supporter * Member Sponsor
    Join Date
    Jun 2019
    Location
    Rutland, OH
    Posts
    33,620
    Post Thanks / Like

    Default

    Thanks for sharing this! I like your technique explanation.
    “If your too busy to fish, you’re too busy!” Buddy Ebsen
    PROUD MEMBER OF TEAM GEEZER
    (Billbob and “G” approved!)
    Proud member of Tekeum’s Jigs Pro
    Staff

    https://heavenornot.net/

    heavenornot.net
    Likes SpeckledSlab LIKED above post

  7. #7
    Join Date
    Jul 2022
    Location
    Dallas, Texas
    Posts
    19
    Post Thanks / Like

    Default

    I use the VMC Spinshot/Gulp Minnow rig and get the same great results. Your rig is a whole lot cheaper, so I'll give it a try. What size swivel are you using for the size 8 and 10 hooks? What is the shaft length on those hooks? Thanks for the write up.
    Likes SpeckledSlab LIKED above post

  8. #8
    Join Date
    May 2019
    Location
    Kentucky
    Posts
    156
    Post Thanks / Like

    Default

    Quote Originally Posted by Cliffardo View Post
    I use the VMC Spinshot/Gulp Minnow rig and get the same great results. Your rig is a whole lot cheaper, so I'll give it a try. What size swivel are you using for the size 8 and 10 hooks? What is the shaft length on those hooks? Thanks for the write up.

    I have a pack or two of each of the 2 smallest VMC spinshot hooks around somewhere. They’re great hooks for nose hooking, but I never could get used to that style and threading them into a lure.

    im using a VMC #7 rolling swivel with #10,8 and 6 of the Gamakatsu siwashes.

    #6 of the same VMC for #4,2,1 on the Gammy

    had to move to a #5 swivel for the 1/0.

    The VMC rolling swivels are using their own scale, they don’t seem to quite line up with any other mfgr as far as size to numbers.

    I’ll see if I can find the chart that has all the hooks lined up on a grid so you can get an idea of size.
    Thanks SpeckledSlab thanked you for this post

  9. #9
    Join Date
    May 2019
    Location
    Kentucky
    Posts
    156
    Post Thanks / Like

    Default

    Name:  IMG_0064.jpg
Views: 306
Size:  77.0 KB


    one note, the #10 size is only available in bright nickel best I have been able to find. I prefer the black nickel coating, but I have no empirical evidence for this preference. I used the bright nickel for two years with no concerns.
    Likes S10CHEVY, kevk, MCG1 LIKED above post

  10. #10
    Join Date
    Mar 2023
    Location
    Travelers Rest, SC
    Posts
    377
    Post Thanks / Like

    Default

    Very nice write up. A lot of good info there.

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP