HaHa HaHa:  0
Results 1 to 7 of 7

Thread: Bfs fishing

  1. #1
    Join Date
    Nov 2014
    Location
    mississippi
    Posts
    957
    Post Thanks / Like

    Default Bfs fishing


    I posted several weeks ago about getting in to this. I went a cheap route cause i wasn’t sure how it would turn out. I have the cast king zephyr combo with the 6ft 2in ul. There is as huge learning curve as to casting this rig. When you cast a spinning reel the spool does not turn so line just comes off. Not so with baitcasters. You have to get the spool turning. With an ultralight rod this does not happen quickly. If your casting right handed and you release pressure to late your bait may very well end up behind you. I have practiced till i am decent and you can keep the bait low to the water but i am not gonna pursue this any further. I have put this reel on one of my medium light bass rods and i can throw a 1/32 jig extremely well so i love the bffs reels and have bought another shimano stx for bass and crappie they are outstanding when skipping under a dock. But with a true ultralight rod the inertia to get the spool spinning takes too long for perfect accuracy. I’m sure with hours of practice i could get good but for now im gonna stick with what im used to.


    Sent from my iPad using Crappie.com Fishing mobile app
    Likes SuperDave336, gillchaser999, skeetbum, MCG1 LIKED above post

  2. #2
    Join Date
    Jul 2018
    Location
    North Carolina
    Posts
    32,097
    Post Thanks / Like

    Default

    Thanks for the report Murdok on the bfs system. I’ve been thinking about them too.

  3. #3
    BuckeyeCrappie's Avatar
    BuckeyeCrappie is offline Super Moderator * Crappie.com Supporter * Member Sponsor
    Join Date
    Jun 2019
    Location
    Rutland, OH
    Posts
    33,541
    Post Thanks / Like

    Default

    Good post!
    “If your too busy to fish, you’re too busy!” Buddy Ebsen
    PROUD MEMBER OF TEAM GEEZER
    (Billbob and “G” approved!)
    Proud member of Tekeum’s Jigs Pro
    Staff

    https://heavenornot.net/

    heavenornot.net

  4. #4
    skeetbum's Avatar
    skeetbum is offline Crappie.com Legend - Moderator Jig Tying Forum * Crappie.com Supporter
    Join Date
    Dec 2007
    Location
    Florida
    Posts
    22,999
    Post Thanks / Like

    Default

    I’ve watched a couple of videos by guys that are real good with it. Not sure I could adjust but I’d try someone else’s first. Casting my new Pfenix which I think is xul or something like that feels to me what a bfs looks like when loading up before the release. Having used BC in the past I’m used to them but there’s always a learning curve with new techniques. Have fun and good luck with it.
    Creativity is just intelligence fooling around

  5. #5
    Join Date
    Mar 2006
    Location
    Okla City
    Posts
    1,802
    Post Thanks / Like

    Default

    There is a significant learning curve to using BFS equipment. My first BFS outfit was also a KK Zephyr set, but in 5.5 feet. I've used traditional baitcasters since the 1950s. Typically, with the older ones, you cast fairly hard and use a lot of wrist action. To master the BFS rods and reels, you almost lob cast, letting the loaded up rod move the lure, and the line follows. BFS is not a true UL. Most BFS rods are best suited for 2-8 gram lures. If you are really good at casting them, you can stretch that down to 1 gram or so. They shine with small lure in the neighborhood of 3 grams. I have two outfits set up for crappie that will easily handle 1/24th and 1/16th jigs with a plastic. My preferred fish is Smallmouth Bass, and BFS works great for them. Baitcasting was a power rig, but with BFS, you need to relax and let the rod do all the work. I rarely use any other type equipment now.

    Sent from my SM-G991U using Crappie.com Fishing mobile app
    Proud member of TEAM GEEZER
    Likes gillchaser999, skeetbum LIKED above post
    Thanks murdok thanked you for this post

  6. #6
    Join Date
    Aug 2020
    Location
    Las vegas
    Posts
    732
    Post Thanks / Like

    Default

    Very challenging to use but if master it...can be very rewarding when fighting big bluegill on ul or xul casting rod. Thanks for the write up!

    Sent from my SM-S918U using Crappie.com Fishing mobile app

  7. #7
    Join Date
    Jun 2022
    Location
    Harmony, NC
    Posts
    219
    Post Thanks / Like

    Default

    I recently got into BFS. While I opted to go for the best available reels on the market, I didn’t go the same route on rods and ordered them from ali express. One is the Ace Hawk Venom in 5 ft 6 in. The action is moderate fast and it can load well on a 1/32 oz jig + plastic. I would definitely recommend it for crappie because of the soft rod action. Also, it does not feel too powerful for bluegill. Plenty sensitive for $40 - $45. The second is Tsurinoya Dragon II 6 ft in UL power. It is correct stated as a fast action rod and will cast 1/32 oz without issues, though the Ace Hawk will load better at that weight. Again, plenty sensitive for $74.99. No issues at all with 1/16 oz+ jigs on both rods.

    In my opinion casting bfs reels calls for a much more refined cast than bass baitcasting reels. Smooth fluid motion has helped me. But I’ll get a birds nest when I unconsciously whip cast.

    It is an interesting light tackle fishing technique. So far I have used it in still water and looking forward to using it in the streams during fall trout stocking. Using the thumb for braking in tight quarters should be a big benefit.


    Sent from my iPhone using Crappie.com
    Likes IkenI, skeetbum LIKED above post
    Thanks murdok thanked you for this post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP