Thread: how to stay tied up to bridge or columms?

I use 36" aluminum bar clamps from Harbour Freight ($9 when on sale). these will fit almost any pilling and tie the boat off with bungee cords for alittle play when boat traffic passes. If the pilliings are huge just measure them and see if you need a 36" or up to 54". 36" Aluminum Bar Clamp

Originally Posted by i-catch-cartags

Cut 2 2x4 the width between the beams drill a hole in the center tie your rope off if you can reach these beams by hand just put it between the beams & tie to the front & rear of your boat. if the beams are out of reach you,ll have to make ya something to place your boards to reach these beams i made mine out of (pvc) but i could reach one probaly 15 foot high.

I use an o ring screw in the center of my 2x4s and put a heavy duty spring on it and tie the rope to the spring. The boat doesn’t take damage from any strong waves coming by. Works great!!!!!

Nine year old thread. Good try, but it's not the record.

Great post- good info, thanks!

In the past I have heard mention of using a 3M glue to attach a a pad eye to the pillar.

Sent from my E6810 using Crappie.com Fishing mobile app

Fish in another location and save yourself a lot of work