HaHa HaHa:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Trailer pads.

  1. #1
    silverside's Avatar
    silverside is offline Crappie.com 2K Star General * Crappie.com Supporter
    Join Date
    Apr 2006
    Location
    Pontiac, Illinois
    Posts
    2,481
    Post Thanks / Like

    Default Trailer pads.


    Going to replace trailer pads on my small trailer. I don't really see a need for treated lumber. Should I use treated or not?

    Sent from my SAMSUNG-SM-G890A using Crappie.com Fishing mobile app

  2. #2
    Join Date
    Feb 2011
    Location
    Lexington, South Carolina, United States
    Posts
    8,924
    Post Thanks / Like

    Default

    Treated lumber will react with aluminium so I'm told. I've always used treated lumber covered with carpet and the trailer slick pads so I've never had a problem with my aluminum boats. Don't think it's an issue with glass boats. Just seems to me it last a lot longer before rotting.
    I've wondered if the artificial lumber they make for decking would work, but never pursued it.
    Mark 1:17 ...I will make you fishers of men
    Thanks silverside thanked you for this post

  3. #3
    Join Date
    Apr 2007
    Location
    louisville ky
    Posts
    6,124
    Post Thanks / Like

    Default

    "I've wondered if the artificial lumber they make for decking would work, but never pursued it."

    Don't know for sure, but I've heard it's slicker than snot on a door knob, don't take bow winch off till you get in the water.
    smiles are contagious, spread them around
    Proud Member of the ZIPPER Club
    & Team Geezer
    Likes silverside LIKED above post

  4. #4
    sinkermaker is offline Crappie.com Legend * Crappie.com Supporter
    Join Date
    Feb 2011
    Location
    Lake Murray SC
    Posts
    6,125
    Post Thanks / Like

    Default

    Definitely use treated lumber and the new treatment does not affect aluminum like the old treatment did. The boat will be isolated by the carpet. Where there was a problem was people using treated plywood to replace transoms.
    Thanks silverside thanked you for this post

  5. #5
    Cray's Avatar
    Cray is offline Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum * Crappie.com Supporter
    Join Date
    Oct 2010
    Location
    Byhalia,Mississippi
    Posts
    17,388
    Post Thanks / Like

    Default

    I have used pressure treated on every boat trailer I have owned and never had a problem. Just cover with carpet and go on. Did have a bit of oxidation on some aluminum rails inside the boat where deck was in direct contact. But after 10 years it wasn't anything to be concerned about.
    Proud Member of Team Geezer
    Charlie Weaver USN/ENC 1965-1979



    Thanks silverside thanked you for this post

  6. #6
    Join Date
    Nov 2006
    Location
    Tavares, FL
    Posts
    2,424
    Post Thanks / Like

    Default

    Quote Originally Posted by wannabe fisherman View Post
    "I've wondered if the artificial lumber they make for decking would work, but never pursued it."

    Don't know for sure, but I've heard it's slicker than snot on a door knob, don't take bow winch off till you get in the water.
    I replaced the trailer pads on my 2013 tracker, after one year the original pads rotted and fell off. With the "artificial lumber",

    I used the heavy decking material https://www.lowes.com/pd/AZEK-Harves...ard/1000148915.

    Not recommending this product, but this is the type of material I used. Use stove bolts to attach boards to trailer frame and Counter sink the bolt holes so the top of the bolt is below the top of board.

    If your concern is "heard it's slicker than snot on a door knob" you can put the carpet over the boards.

    It is always a good idea to NOT undo the trailer wench strap until the transom is over, in the water.

  7. #7
    Join Date
    Dec 2009
    Location
    illinois
    Posts
    9,952
    Post Thanks / Like

    Default

    Wow That stuff is pricey. Hate to have to do a whole deck with it.



    MEMBER CRAPPIE MAFIA

  8. #8
    Join Date
    Apr 2007
    Location
    louisville ky
    Posts
    6,124
    Post Thanks / Like

    Default

    Quote Originally Posted by wilbur View Post
    Wow That stuff is pricey. Hate to have to do a whole deck with it.
    you got that right I looked at it for a deck didn't look at it too long !
    smiles are contagious, spread them around
    Proud Member of the ZIPPER Club
    & Team Geezer

  9. #9
    Join Date
    Apr 2015
    Location
    MO
    Posts
    295
    Post Thanks / Like

    Default

    These are pretty expensive but I should never have to worry about replacing them again. I only needed 2 8' bunks for my Tracker 175 so if you deduct the cost of 2x4's, carpet and my time I felt I could justify it. Sure makes loading and unloading easier; just make sure you don't unhook the strap until you get the boat in the water!

    https://www.ultimatebunkboards.com



    Sent from my iPad using Crappie.com

  10. #10
    Join Date
    Sep 2012
    Location
    Alabama
    Posts
    1,806
    Post Thanks / Like

    Default

    Regular 2x4 or 2x6 and treat with Thompson's Water Seal. The Copper tox I believe it is that the newer treated wood is made with will react with the aluminum and water causing galvanic corrosion. Do a internet search, I have seen boats with corrosion where they sit on the newer treated lumber.
    Thanks silverside thanked you for this post

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP