Thread: Slide for Terrova

I see you drilled to more seat posts


Sent from my iPhone using Tapatalk

Originally Posted by Oldyankee

I see you drilled to more seat posts


Sent from my iPhone using Tapatalk

I ordered 5 extra bases factory installed.

Originally Posted by crappiejigger

You could always do like i did and make your own bracket? this past spring i purchased a mototrguide xi5 which i know isn't your trolling motor,but it has to hang over the side of the boat drasticly. And of course the mounting bracket didnt line up to my old motorguide motor bolt holes. I tried a minn kota sliding bracket thinking i could possibly modify it and make it work,but had no luck. So i purchased some 2" angle iron and made two slide brackets that would allow trolling motor to hang over side of boat, and still slide in enough to be inside the rub rail radius. then i welded on some 1/8" plate strips to line up with old mounting holes so i didn't have to drill any new holes in my fiberglass boat. I also made a pull pin that locks it in the stowed and deployed position. sometimes you have to make custom stuff to suit your specific needs, just takes a little time. If you want pics if you think ya might like to try that route just let me know?

Admire a mechanic. I however, need instruction, and a supervisor to work a screwdriver


Sent from my iPad using Tapatalk