Thread: Humminbird Helix 7/ US2 interference

I work for BPS in marine electronics, and we run into this pretty often. The US2 transducer is designed to only work with 2d sonar, and it does ok with older 2D units. But what you're seeing is typical with newer units with down imaging. Not much you can do other than mount the Helix transducer on your Terrova, which is a pain. A company called Cornfield Crappie has a kit designed for the Terrova that I hear works pretty good. By the way, I had the exact same issue on my own boat. Ended up leaving my old Garmin 500C on the front. Put the new unit on the console on a swing arm mount.

A good option is this and just use the transducer that came with your unit.
https://www.podunkideas.com/da-ducer-apparatusreg.html

Lots of interference info in this thread ...

http://www.crappie.com/crappie/fishi...-interference/

Rickie

If you have the older terrova with the groove on the shaft there is a trick to mount it.

Originally Posted by BobL

I work for BPS in marine electronics, and we run into this pretty often. The US2 transducer is designed to only work with 2d sonar, and it does ok with older 2D units. But what you're seeing is typical with newer units with down imaging. Not much you can do other than mount the Helix transducer on your Terrova, which is a pain. A company called Cornfield Crappie has a kit designed for the Terrova that I hear works pretty good. By the way, I had the exact same issue on my own boat. Ended up leaving my old Garmin 500C on the front. Put the new unit on the console on a swing arm mount.

Thanks for the reply! This is a 2d only unit.

Originally Posted by rnvinc

Lots of interference info in this thread ...

http://www.crappie.com/crappie/fishi...-interference/

Rickie

Thanks, Ricky. I had forgotten about the sticky.

Originally Posted by Lloakley930

If you have the older terrova with the groove on the shaft there is a trick to mount it.

Thanks for the reply! I have another unit's transducer routed through that groove.

Originally Posted by scrat

A good option is this and just use the transducer that came with your unit.
https://www.podunkideas.com/da-ducer-apparatusreg.html

That's a great idea! But I really want to use the US2 if I can.