Thread: Helix5 issues

Did you try restoring factory default settings?

yeah didn't change anything. I also set it to 2d

Sent from my Moto G (4) using Crappie.com Fishing mobile app

If you have the transducer it came with, hook it up and hang over the side and check it. I'm betting problem might be transducer in trolling motor. Or if some one has a Humminbird unit try hooking it to their trans ducer.

TM transducer works fine with other hummingbird unit

If that's the case then you must have something internal. At 75. That's not bad price to get one refurbed and updated. I might still do a little testing before sending in but that's just me.

Other than reading funky screen and pixels are in great shape with GPS I am sure I couldn't replace it for less

Sent from my Moto G (4) using Crappie.com Fishing mobile app

Humminbird DI models are not compatible with US2 ...

https://www.minnkotamotors.com/US2-C...?LangType=1033

NOTE: Minn Kota motors with built-in Universal Sonar 2 (including those with i-Pilot Link) are not compatible with Humminbird's Down Imaging Sonar. An external XTM 9 WIDE DI 20 T (83/200) or XTM 9 DI 25T (200/455) is required for all sonar readings with all HELIX 12 , HELIX 10, HELIX 9, 1100, 900, and 800 Humminbird Down Imaging units. An external XTM 9 DI 25T transducer would be required for the Down Imaging versions of the HELIX 7 and HELIX 5 along with the 788ci HD DI.

Rickie

Are you telling me that even the 2d frequency won't work and that the temp won't read. I do understand that the DI will not work.

Sent from my Moto G (4) using Crappie.com Fishing mobile app