Likes: 0
Thanks: 0
HaHa: 0
Slabmaster II
Helix 9 Chirp-Us2
Which setting (Helix 9 G2 Sonar Chirp/GPS) should I select to operate on the US2 (Terrova). There are 2 hummingbird selections and I believe 3 generic... I'm guessing I'm not receiving full benefit of the chirp by using the Us2...
Crappie.com 2K Star General
I am running a Helix 9 G2N chirp si, along with a terrova T/M. I have mine running the transducer that came with the unit. If memory serves me correct the US2 is only a 2D ducer. Nothing else. You can put a very nice ducer mount from Podunk which he is a member here on CDC. I have the ss model that I modified to run two ducers, and on top a GPS puck. My unit is mounted at the bow with a "D" model ram mount. Works very good.
dave
in currituck
Crappie.com 2016 Man of the Year
* Member Sponsor
The US2 in the Terrova is 83/200kHz ...
You can choose HB 83/200kHz and utilize basic 83kHz and 200kHz ...
Or you choose the CHIRP choices centered around the 83kHz and 200kHz and utilize sweep frequency technology ...
Which is best is determined by water conditions, bottom composition, witchcraft, etc ...
Experiment to see which gives satisfactory results for the given conditions that day ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Crappie.com 2016 Man of the Year
* Member Sponsor
Thanks tahoe ...I like the black ...Originally Posted by tahoe 50
I am running a Helix 9 G2N chirp si, along with a terrova T/M. I have mine running the transducer that came with the unit. If memory serves me correct the US2 is only a 2D ducer. Nothing else. You can put a very nice ducer mount from Podunk which he is a member here on CDC. I have the ss model that I modified to run two ducers, and on top a GPS puck. My unit is mounted at the bow with a "D" model ram mount. Works very good.
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Slabmaster II
Thanks Dave! Thanks Rickie!
I had thought about one of your (Rickie's) transducer mounts. I get in and out of the boat on the starboard side of the bow. Where the Terrova is mounted (Port side where the ducer is mounted on Dave's boat) and where I get in and out I couldnt see a way for me to get safely in and out.
Crappie.com 2K Star General
You can have your pipe as short or long as you want. My T/M is center mounted. The pole or pipe is 3/4 steel electrical conduit from Home Depot. 10 foot cut to what I want. I have bent it up several times. I drilled and tapped for a set screw in sachets of the fittingd. The fittings are standard pipe from Home Depot also. I spider rig and with this set up I can see my jigs running at what depth.
Sent from my SM-G900V using Tapatalk
dave
in currituck
Crappie.com 1K Star General
Or go to Precision Sonar and get their cable guard and mount a good transducer on the trolling motor. Throw the US2 away. I use the large original transducer for my Helix 10 Mega and it works great.
Sent from my iPad using Crappie.com
Reply With Quote