Lower the tail of the xducer 1 click in the bracket notches ...
Rickie
Here is a start up chart that may be of some help also. Good for Core and first Helix models. Now the New Helix chirp models may be different .
Be safe and good luck fishingNorthforker LIKED above post
Lower the tail of the xducer 1 click in the bracket notches ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar AdvisorNorthforker LIKED above post
Heading out this morning, will try these settings first before I adjust the transducer, thanks guys, appreciate the feedback!!!!
Oldnewbie LIKED above post
I would like your feed back on did any of this work for you if so what worked to fix problem. Your feed back could be very important to help me and others maybe having these problems in the future.
Be safe and good luck fishing
mine looses bottom anything over 10 mph. Havnt tried sonar, just di or si. I have the spliter with the switch.. One transducer on trolling motor other on transom. I switch wires on back of switch because I get a lot of interference on the one setting. I normally use troll motor and transducer so I hooked those wires to clear switch setting
The menu on the new Helix chirp models is different, I tried to use this chart yesterday on my new Helix 7 chirp DI SI and I couldn't find most of these settings in the menu.