Thanks Thanks:  0
HaHa HaHa:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: 2005 Tracker Pro Crappie 175

  1. #1
    Join Date
    May 2009
    Location
    East Ridge, TN
    Posts
    194
    Post Thanks / Like

    Cool 2005 Tracker Pro Crappie 175


    2005 Tracker Pro Crappie 175 with Mercury 50HP Motor - $5,500.00

    This is not your ordinary Crappie fishing boat.
    I have used this boat every day that I am able to get
    out since I am retired with trips averaging 3 to 4 hours.
    This boat has been used for everything from Stripers to Bluegill.
    I have set it up with electronics and everything
    you need to have fun fishing.
    This boat has been mechanically serviced regularly with a recent tune-up.
    This boat has been modified from a 12v to 24v Trolling Motor.

    From Bow to Stern here are the main features:
    Minkota Maxxum 24v Trolling Motor 1 year old
    Huminbird Helix 7 Down Imaging with GPS on RAM Mount on Bow
    Comfortable pedestal fishing seats front and rear
    Bait well which I use for dry storage
    Forward live well
    Additional Dry stroage under seat
    Rod Locker on passenger side
    New driver and passenger seats
    Huminbird Onix 10 Side and Down Imaigng with GPS on RAM Mount at Console
    Live Well under passenger seat
    Additional Bait Live well being used for dry storage
    Two Pedestal positions for rear fishing seat
    Minkota 3 Bank Charger for easy plug in charging
    This has a custom added Voltage Switch which allows you to
    select battery one or battery two or both and off for charging
    The Trolling Motor is on a 50 AMP block
    At the Stern is a PowerPole Micro Anchor with 8' Pin on a removeable
    bracket on the transom.There are two FOB controllers for it as well as a phone APP
    Two Inch Boat Buckle Tie Downs

    And on the Trailer from Bow to Stern:
    It has a folding tongue with wire retractable saftey hooks (no chains hanging on the ground).
    The little wimpy winch that was originally on the trailer has been
    replaced with a 1800lb winch for easy cranking. (Overkill is my middle name )
    The pivot jack has also been replaced with a 1200lb unit
    All lights functioning and water proof.
    New Axle with Steel-belted Radial Tires
    New Bearings
    Spare Prop and Motor Toter


    Name:  BassIMG_0106.jpg
Views: 2985
Size:  80.1 KBName:  Bass_storage_emulated_0_DCIM_Camera_IMG_20160526_063333340.jpg
Views: 2603
Size:  24.6 KBName:  BassIMG_0109.jpg
Views: 3427
Size:  83.0 KBName:  BassIMG_0108.jpg
Views: 2720
Size:  76.5 KB

    I am home in Melbourne, FL now
    It was a boat that I got from a Charley in Forsythe, GA
    It was showroom when I got it and the guy wanted to sell to someone who wants to fish it .
    That would be me, as you could literally remove the engine cover and lick it and it was clean, less than fifty hours or so on the motor.
    I took it to James Perry in Sequatchee Valley, Tn and he said it tested for leakdown and compression without any problems an gave it a top grade. (one of the best he had tested)

    I got it to fish and I outfitted it with nice reliable gear and use it every day (still do) that I can get out
    I'm going in the AM and I love the micro anchor as I fish solo most of the time.
    Regular upkeep on tune ups and water pump exchanges, lower unit etc..

    No saltwater no ethanol never.

    Bass fish in FL and Whites, striper and crappie in TN
    I originally had TN numbers on it and then a few years ago I re-registered in Florida.
    Just because you're paranoid doesn't mean there is no one out to get you

  2. #2
    Join Date
    Apr 2017
    Location
    Indiana
    Posts
    1,077
    Post Thanks / Like

    Default

    sounds like a killer deal right here for someone needing a nicely set up boat.

  3. #3
    Join Date
    Mar 2009
    Location
    douglas ga
    Posts
    891
    Post Thanks / Like

    Default

    Pm sent

  4. #4
    Join Date
    May 2009
    Location
    East Ridge, TN
    Posts
    194
    Post Thanks / Like

    Default

    Quote Originally Posted by dbowling View Post
    sounds like a killer deal right here for someone needing a nicely set up boat.
    I over did everything, but I feel confident on the rig
    Thanks,
    Just because you're paranoid doesn't mean there is no one out to get you

  5. #5
    Join Date
    Dec 2016
    Location
    Kentucky
    Posts
    142
    Post Thanks / Like

    Default

    Awesome looking rig, can't beat that price, wish my hull on mine looked that good!

  6. #6
    Join Date
    Apr 2017
    Location
    Indiana
    Posts
    1,077
    Post Thanks / Like

    Default

    for this money and the way its set up it should be gone, I would buy it if I didn't have a boat set up already.

  7. #7
    Join Date
    Jan 2017
    Location
    Seville, Ohio
    Posts
    10
    Post Thanks / Like

    Default

    Is the Mercury 2 stroke or 4

  8. #8
    Join Date
    May 2009
    Location
    East Ridge, TN
    Posts
    194
    Post Thanks / Like

    Default

    2 Most people ask if it is a 4 as it is quiet and smooth (just a brag)
    Just because you're paranoid doesn't mean there is no one out to get you

  9. #9
    Join Date
    Apr 2007
    Location
    louisville ky
    Posts
    6,065
    Post Thanks / Like

    Default

    Quote Originally Posted by BassERT View Post
    2 Most people ask if it is a 4 as it is quiet and smooth (just a brag)
    nice to know if it's 2 or 4 stroke, but in my book it doesn't make much difference as long as it runs good.
    smiles are contagious, spread them around
    Proud Member of the ZIPPER Club
    & Team Geezer
    Likes Cane Pole, Eagle 1 LIKED above post

  10. #10
    Join Date
    Dec 2016
    Location
    Lake St Louis, mo
    Posts
    5,742
    Post Thanks / Like

    Default

    still have it? buddy of mine in villages is looking.

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP