"Killer Jigs", i believe he has them down to 1/100 oz.
Thanks, chaunc, I've ordered some jigs from TJ. However, he only goes down to 1/64. However, I've found the 1/80 before. Here's a photo of 3 jigs with barbs that I have, all on a number 6 hook, from left to right--1/80, 1/64, and 1/32. The latter was added for comparison. They're out there, just have to find them. Notice how thin the lead is on the 1/80 hook shank, and how small the barb is, but it's there. I just need to find them again.
"Killer Jigs", i believe he has them down to 1/100 oz.
If you could get a jewelry scale and weigh those, I think a 1/48 from Litewire will probably be pretty close. That's if a extra fine wire hook will work for your application. Maybe pour the 1/64 and trim a little off with a dremel?
Thanks. I've got some 1/64's on order, so the dremel idea is a good one if I can't find them somewhere. I looked at Killer Jig and they don't go down to 1/80 on the web site, but I didn't call them yet.
Years ago I got some 1/80. Kiptail jigs from a member here from Minnesota. Keith Nelson, crappie Keith was his screen name. Maybe he could direct you to where you could find some 1/100 heads too. I’m not sure if he’s still on the site but it won’t hurt to try to find him.