Thread: Mega Live Imaging

Drumski79, I recently added the MegaLive transducer to my boat and wired the 12v power wire to my main rocker switch that shuts off all power to the components. I attached ground wire and drain wire to the ground block junction terminal that my switches are attached to. Humminbird recommends using a switch on the ML transducer so it can be turned off and not drain the battery source. Good luck and post some pics on the water.
Tightlines to ya and see ya on the water.
Krappie Krane

Originally Posted by KrappieKrane

Drumski79, I recently added the MegaLive transducer to my boat and wired the 12v power wire to my main rocker switch that shuts off all power to the components. I attached ground wire and drain wire to the ground block junction terminal that my switches are attached to. Humminbird recommends using a switch on the ML transducer so it can be turned off and not drain the battery source. Good luck and post some pics on the water.
Tightlines to ya and see ya on the water.
Krappie Krane

Thank you Krappie Krane! That gives me a good idea of what needs to be done. I’ve read so many horror story of interference issue, I just needed confirmation of what actually works. I’ll post my simple configuration when I’m finished.


Sent from my iPhone using Crappie.com Fishing mobile app

Okay, so I think I have it lined out. I installed an on and off switch. I also saw a guy make a transducer pole out of PVC. So l am going to try it out.


Sent from my iPhone using Crappie.com Fishing mobile app

Looks good and hope you like the install. The crestliner has a lot of room up front which is awesome.


Sent from my iPhone using Crappie.com

I like the mount. Simple


Sent from my iPhone using Tapatalk

Originally Posted by tcounty

I like the mount. Simple


Sent from my iPhone using Tapatalk

Thanks tcounty! I saw it on YouTube. It is just an inch PVC pipe inside inch and a quarter PVC. Very simple and cost less than $20.


Sent from my iPhone using Crappie.com Fishing mobile app

Originally Posted by Drumski79

Thanks tcounty! I saw it on YouTube. It is just an inch PVC pipe inside inch and a quarter PVC. Very simple and cost less than $20.


Sent from my iPhone using Crappie.com Fishing mobile app

I’m getting there. Should finish tomorrow


Sent from my iPhone using Tapatalk

I got out today. I was kind of chilly (44 deg). But I took a promising video. I don’t know how to attach a video. So, here’s a snapshot of the video, LOL. Now, I just need to learn how to dial it in. And how to upload a video.




Sent from my iPhone using Crappie.com Fishing mobile app