Thanks Thanks:  0
HaHa HaHa:  0
Results 1 to 7 of 7

Thread: voltage discrepancy

  1. #1
    Join Date
    Aug 2014
    Location
    Mississippi
    Posts
    105
    Post Thanks / Like

    Default voltage discrepancy


    I recently switched to lithium batteries and added a Garmin livescope to my 2 helix 10’s. Every thing is wired correctly, each unit on it’s own circuit with proper gauge wires, etc. I have fished with new rigging 4-5 times with no problems. Every thing works as it should. Why does my battery voltage show 13.1 on battery monitor (ionics bluetooth), 13.1 on volt meter at battery post and 13.1 on volt meter at each power plug that plugs into each unit. All 3 units show 12.2 volts on each unit screen and every thing else 13.1. What’s the deal. Any ideas?

  2. #2
    Join Date
    Mar 2006
    Location
    West Tennessee
    Posts
    1,594
    Post Thanks / Like

    Default

    Mine does same thing with regular deep cycle battery. I’ll have 12.7 at battery and 12.0 on deck unit. No idea why.


    Sent from my iPhone using Tapatalk

  3. #3
    rnvinc's Avatar
    rnvinc is offline Crappie.com 2016 Man of the Year * Member Sponsor
    Join Date
    Sep 2008
    Location
    West Ky
    Posts
    13,089
    Post Thanks / Like

    Default

    The voltage readout the unit shows is not an amp meter of the voltage coming to the unit ...

    Its the operating voltage - after the processor and screen brightness is deducted ...

    Lower the screen brightness and watch the unit voltage readout increase ...

    Rickie
    www.podunkideas.com <--Click here
    ------------—————
    https://www.crappie-gills-n-more.com/
    https://cornfieldfishinggear.com/

    ------------------------>> Pro Staff Sonar Advisor
    Likes Chuck Adams, BigDawgg, DOFC, NIMROD LIKED above post

  4. #4
    Join Date
    Mar 2006
    Location
    West Tennessee
    Posts
    1,594
    Post Thanks / Like

    Default

    I had no idea lol. I’ve been using it as a battery monitor for years.


    Sent from my iPhone using Tapatalk

  5. #5
    Join Date
    Jun 2004
    Location
    SW Indiana
    Posts
    2,734
    Post Thanks / Like

    Default

    It’s not possible to accurately measure battery voltage on wires that have a load on them. Your units are displaying the voltage they are actually seeing. With that much drop, you probably have inadequate wiring. Good wiring you can generally get it down to 0.3V, but that’s about as close as you’ll get it.
    Likes BobB, Spydude1 LIKED above post

  6. #6
    Join Date
    Sep 2018
    Location
    N GA
    Posts
    1,382
    Post Thanks / Like

    Default

    Agree with the above. You can measure the voltage at the load, but it requires know-how to get around the insulation to get meter probes directly to the pins. I have a special set of probes with very sharp tips just for this.

    I will also add that the voltage displayed by the graph might not be totally accurate, or representative of actual input voltage, as Ricky alluded to above. It is a good easy "watchdog" to how your power is doing, and that is what I want when fishing.

    PS units matter; Amps are current, not voltage, and power (watts) is neither.
    "Alive without breath, as cold as death; never thirsty, ever drinking, all in mail never clinking."

  7. #7
    Join Date
    Aug 2011
    Location
    IL
    Posts
    1,353
    Post Thanks / Like

    Default

    What CatFan said .... The voltage must be checked with normal load applied since there will be no voltage drop if there is no current flow.

    The easiest way to do that is by looking at the reading on the unit as you are doing ..... The test Rickie recommended is one of the best ways to check how good your wiring and connections are. The voltage will vary as the brightness is turned up and down, but shouldn't drop more than 2-3 tenths of a volt if everything is healthy in the wiring circuit. It seems you are dropping over a volt from the battery to the unit .... So, you have bad connections or insufficient wire size for the load.
    _______________________________________
    Looking for the one that makes it all worthwhile.
    Likes Redge LIKED above post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP