Search:

I think the base on the fortrex is the same as the ultrex as for as the mounting holes, i have read that the trolling motor of the fortrex will mount on the ultrex mount but the ultrex won't mount on...

Hi guys I have a question about wiring up my heading sensor can you wire it to a wire that the power can be switched off. In the instruction it shows it connected direct to battery power. I have a...

I warm the injector instead of the mold. I lay it on a griddle while i heat my plastic . Get you some vise grip metal clamps the ones with the pads that move or a wood working vise i have two they...

That mold shoots really good, I have 4 of them, plus the one with the same body but with the curly tail. I shot 250 Monkey Milk Saturday had very few culls hardly ever has any dents. I always hold...

Go to his web site and u can order from there. Ultra Molds is the name of the company. Cub48

At least this is a hobby with benefits u can make the baits u want and sell a few to your buddys !! Whats another 1200 LOL Cub48

Hi Gonzz I have the Mini Shooting Star it is a very good machine very well built and i think it is worth the money, it will shoot as small amount as 1 pint per pot. I usely shoot 2 pints one in each...

Snake the 669 that Bass Tackle Molds has is close it shoots 14 at a time i have 4 of these molds and there is another with same body but has a curley tail it shoots 8 at a time the 669 is 2.4 inches...

Yep Motorcycle helments and ski bibs and ski coat with rocky thermals the heavy cold temp set they are the fleese type muck boots with toe warmers. good pair gloves. I have ran in 23F at 30mph in...

I never heat my molds. I always suck my plastic up from the cup i do heat my injector good and warm. Pull slow to fill injector u can pull air in when u force it. If u are not getting any flash when...

Ok here is a picture if i can get it to post!!!

Ship the carpenters vice i use is tall enough that it clamps more in the middle. i have 2 of them yesterday i clamped 4 molds and may of been able to do 5. My vise has two 1/2"rods on the bottom the...

Two clamps to use a set of welding clamps the ones with pads looks like vise grips with c clamp on the end. The other is a carpenters vise lowe and Harbor Freight has them for 20.00 mount it on...

6930 or 6935 They are not as bad to through a loop with the bigger spool. after u use a 30 or 35 u won't go back to the little reels. I have 5 or 6 of the pflugers 2 are presidents 6935 like both...

Check your infra red tm i have one it is correct until about 250f then it does not read correct. i use a digital thermometer now and i set my cups on a grill to stay warm. Cub48

Will Do !!

Hi Guys
I am looking for a silver that is bright silver. Not smoke or dark silver. I have bought several different ones and they are all too dark i have silver pearl power, Minnow silver, chrome...

I did try the red and white HB power paint for the pink it will make pink may want something to blend it up it makes a pale pink not a hot pink. Cub48

The pancake grill i use is 16X10" this a guess anyway u can spread out your jigs 50 or more at a time u can pick up your jig by the eye with your needle nose pliers dip and tap put on the rack when...

i use tire weights clean and flux some of the new weights are not lead. I know everyone said not to use tire weights mine are free so i use them.They pour fine yes i have a bad one every once in a...

I wear long sleeve and long pants and leather shoes. i heat my lead outside my shop door with a fan blowing so fumes are not coming inside
flux your lead with candle and see where your fumes are...

Does anybody know of a mold maker that makes jig molds. It appears Jacobs has stopped making them. I just bought one and though i might get another one and the link has been taken off. Do-it molds...

add the red to the white the red will most likely be the stronger color. I maybe wrong that is my thinking. U can clear the black but that is double dipping also u could spray clear on them with...

Hi Guys
I just wanted to throw in my 2 cents worth on a problem i have been working with since i started
doing plastic and i have finally found something i like. I started out using the thumb...

I saw a review on the Mini shooting star and was wanting to read over it again to get all the tips
from someone that has used one before i fired mine up. I have searched here and tackle...

If u know someone that does mig welding they might give u enough to make them. or u can buy small rolls at Harbor Freight they make it in steel and aluminum just don't get the flux core. Also there...

Yes u keep the pancake grill on i set mine on about 200- 250 f and if u look on the bottom u can see where the heating coil is and place the head of the jig on the area where the coil is will heat it...

Hi Guys
I was going to powder paint some jigs and had a brain storm!!! I use to heat my jig heads like everyone else with heat gun. I would grab the eye with needle noise pliers heat and dip put...

I have switched to Pfluger reels a few years ago I have 3, 30 Trion and just bought a 35 I would go with the 35 but the 30's are ok also. I have a President in a 40 which is also good i use it on my...

Curt K do u make this mold with the belly on one plate and the top on the other so as u can shoot it as 2 color. Like belly Silver and top Blue ect. I like the fork tail maybe a little shorter it...