Rod Balancing

[kegler01]

Hello all ! Well I finally put my money where my mouth is and built a 9 ft medium light crappie rod . The objective is a casting rod for casting 1/16 to 1/8 oz jigs which the blank I bought is rated for . I used the Fuji KR guide system hoping to improve casting distance and reduce wind knots . The build went well I had studied a lot before starting . Now down to the purpose of this post . The rod is done other than gluing on the butt cap . Its obviously tip heavy , but the rod itself is fairly light , the blank weighed 2.1 oz when I started . I have been reading on rod balancing since I started this project and find it interesting . I have a delima though to balance my rod I would have to add 4 oz of ballast to the butt of the rod . That seems a lot to me and I fear it will deaden the overall sensitivity . If I were to do it again I would have adjusted the grip position a bit to help compensate for the long rod . Ok not knowing what to do I am seeking advice from the more experienced rod builders on reccomendations to balance or not to balance in this situation . As usual I thank you for your help its a huge plus for me.

[Gbcorley]

Put the reel your going to use on the rod and add weight until it gets balanced. The weight will not affect the rod in anyway. A tip heavy rod after a long day will feel heavier then a balanced rod even with the added weight. I know is sounds backwards but some rods like flipping sticks I add 2 to 3 Oz tungsten bbs to the butt just for that reason.

[SuperDave336]

I have an 8’ rod that is tip heavy and I hate it! It came with weights to add to butt and I’ve added them all and it’s still tip heavy. Guess I need some tungsten or a gift bow...... Lol

[DockShootinJack]

Definitely add the reel. That will shift it's balance point of the rod to the back toward the handle. Once your reel is on then you can adjust the balance point to your liking

[Gbcorley]

Put the reel your going to use on the rod and add weight until it gets balanced. The weight will not affect the rod in anyway. A tip heavy rod after a long day will feel heavier then a balanced rod even with the added weight. I know is sounds backwards but some rods like flipping sticks I add 2 to 3 Oz tungsten bbs to the butt just for that reason.

[DockShootinJack]

Two things I don't want to be tip heavy is a fishing rod and a shotgun. Both of those are a pleasure to use when they are balanced. They seem to float to where you point them

[kegler01]

Thanks for the replies . I assumed it would be a given that I put the reel on to calculate the amount of weight needed to balance the rod . Seems like go ahead and add the weight is the concensous . Will adding the weight negatively affectcthe rods sensitivity ? I know it will be more comfortable to use balanced .

[DockShootinJack]

I would think it would add to the sensitivity. If the rod is floating in your hand with neutral tip forward weight surely a smaller peck would be more noticeable than if the rod was tip heavy

[kegler01]

Thats my insticts too that it will add to sensitivity . It just seems backwards thinking to add weight ,but , when I tape a counter balance weight on it feels much more comfortable to hold . As in MUCH more comfortable . Ok thank you all for the help I am gonna do this !

[DockShootinJack]

To allow adjustability in the future I would not glue the butt cap on. If something is needed to secure it a short section of heatshrink tubing does a nice job. Can be removed and the rod balanced again to a different reel.