HaHa HaHa:  0
Results 1 to 8 of 8

Thread: Personal bfs rod.

  1. #1
    Join Date
    Feb 2018
    Location
    Friendswood,TX “south of Houston “
    Posts
    177
    Post Thanks / Like

    Default Personal bfs rod.


    I’ve have always liked bait casting equipment over spinning so I decided to build a extremely light weight UL rod in a bait casting set up. Now I just have to order the Aldebaran bfs reel from Japan for it. But might mod out a Aldebaran I already have, I haven’t decided on that yet. I had to find a blank that could load up a 1/32 oz jig so this 6’6 blank is a whip stick and the guilds took a lot of playing with to get just right. The blank has so much flex and I ended up having to put 12 guides plus the tip and figure the spacing out as I built it. Since I had to put so many guides I ended up going titanium torzite and it still ended up under the 2oz mark I was going after. So I guess we will have to wait and see if this was a complete waist of a lot of time and money or a success.
    Name:  E5C62F6E-C8A4-4F6B-98C1-ABF0A725FEDE.jpg
Views: 986
Size:  43.7 KBName:  70B5C2EA-49E9-4A94-BA9D-05D37E3937BF.jpg
Views: 790
Size:  28.9 KBName:  FA1D85BF-F57D-4BFC-89BA-26414A829744.jpg
Views: 836
Size:  57.1 KBName:  29246572-504B-4C93-8868-5EE3C1E2335A.jpg
Views: 825
Size:  29.5 KBName:  39544FFE-B01C-4D22-BD32-FC1858334328.jpg
Views: 776
Size:  34.6 KBName:  3CD4E6F7-89DD-4CF1-9947-ABE73008E2EA.jpg
Views: 791
Size:  44.3 KB
    Likes SuperDave336, skeetbum LIKED above post

  2. #2
    Join Date
    Sep 2012
    Location
    Alabama
    Posts
    1,806
    Post Thanks / Like

    Default

    That is one light weight bait casting outfit. NICE!

  3. #3
    Slabprowler is offline Crappie.com Legend * Crappie.com Supporter
    Join Date
    Dec 2014
    Location
    Scottsboro Al
    Posts
    9,433
    Post Thanks / Like

    Default

    WOW!

  4. #4
    Join Date
    Feb 2018
    Location
    Friendswood,TX “south of Houston “
    Posts
    177
    Post Thanks / Like

    Default

    I could probably make it a bit lighter witch is the crazy thing. But I have no idea how this blank is going to react. I could possibly scratch my way under 6 oz or it could need more moving weight in the guide set to help load the blank up for casting light crappie jigs�� this is what’s wrong with building rods. The gears in your head never stop turning.

  5. #5
    skeetbum's Avatar
    skeetbum is offline Crappie.com Legend - Moderator Jig Tying Forum
    Join Date
    Dec 2007
    Location
    Florida
    Posts
    22,856
    Post Thanks / Like

    Default

    That’s a busy rod. I like the blue metallic thread. Does it require color preservative?
    Creativity is just intelligence fooling around

  6. #6
    Join Date
    Jun 2009
    Location
    Leslie
    Posts
    4,396
    Post Thanks / Like

    Default

    Although most don't need it these days, I still use color preserver/thread lock on all my wraps. The reason is that it fills in the gaps between the round thread, the blank, and the tiny gap between two round threads laying next to one another.

    It is the great secret to having a good first finish coat without bubbles forming.
    Thanks skeetbum thanked you for this post

  7. #7
    Join Date
    Feb 2018
    Location
    Friendswood,TX “south of Houston “
    Posts
    177
    Post Thanks / Like

    Default

    Its defiantly not my normal guide lay out, but I didn't want 2 to 4 pound line rubbing on the blank. I honestly wrapped this whip stick 5 times before I got the spacing to a point I was happy with it. But we will see for the next one I'm building how it performs with it set up this way. The blank has so much flex it will flex in the real seat gap. I'm going to be testing this thing on crappie all the way to some red fish in saltwater, so its going to get the flex tested for sure.

    On most Metallic or a NOCP (witch means no color preserver, the thread itself is already treated) thread you don't need a color preserver. I personally never use it anymore as it gives you a weaker finished wrap, because it puts a barrier that keeps the epoxy from penetrating the thread down to get a bond directly to the guide foot and blank. Now in saying that, what wickundrh said is true. If your wrap has any gaps you cant burnish out or use a thread that requires a color preserver it will help make the wrap look cleaner or not completely changer the color, in the end its a trade off. I only use threads I know don't need it and wrap it as tight as possible. If I'm not happy with it, I will be cutting it off and redoing it since my name is on the rod and I have pride in that. Most of the gaps come from not grinding the guide foot down so you have a clean and tight transition. The best tool to grind the guide foot down is a knife sharpener that uses a sanding belt. You can roll the guide foot to make sure it doesn't have any sharp edges that will cut the thread, witch will happen. The way to get the clearest and strongest wrap is, going strait epoxy. This will let the epoxy soak in the thread and have the strongest bond directly to the guide foot and blank. Most name brand rod company's as do I, use two coats of flex coat and it also sets up faster. The first coat you want to start at the tip and work your way back to the larger areas you have to cover. It takes epoxy a few minuets to start flowing better. Then go back and take as much of it off as you can, when it dries you should be able to feel the thread ridges. Then then add a thin coat just to smooth out the finish. Since the thread is already soaked and will not soak up the epoxy any more, you will see what it will about look like dried when its wet. Its one of these you see what you get, if its to thin add some more if its to fat or is balling up take some off. A lot of people will cut the finish epoxy with alcohol to thin it out, but in my option that weakens it and if you do it wrong it will not set up correctly. I would never tell anyone to try and cut it. I know Larger scale Custom rod builders that do this so it does work but its way to easy not to get right. I use a bottle warmer that warmers the epoxy witch makes it thinner so it soaks into the thread easier and faster to get a strong bond to the blank. You can get one for like 35$ at mudhole. I would also get a epoxy mixer, it just helps get the finish epoxy mixed properly with no air bubbles.
    Thanks skeetbum thanked you for this post

  8. #8
    Join Date
    Feb 2018
    Location
    Friendswood,TX “south of Houston “
    Posts
    177
    Post Thanks / Like

    Default

    Name:  D17D2333-4BBD-488F-9F53-A95BFDBCE2E7.jpg
Views: 701
Size:  42.0 KB Pulled the rod off the driver and went fishing today. I’m still waiting for my reel but slapped a Aldebaran 50 on it and had to go test her out. Rod works perfectly and makes anything feel huge over all a huge success and definitely started a bfs fishing addiction.
    Attached Images Attached Images   

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP