How to get unit to display distance intervals in SI mode ? This is a gen 1 unit if that matters . Thanks in advance .
Printable View
How to get unit to display distance intervals in SI mode ? This is a gen 1 unit if that matters . Thanks in advance .
I think it's press menu twice to get to the main tabs at the top, select sonar and scroll down, should be an option for SI range lines on or off. I think you're looking for the range lines like 20', 40', etc?
Or, if you are looking for how far out you want to be seeing returns from, from the SI screen, menu once to bring up the SI menu and you can change how far out you'll be looking left and right.
Yes the distance increment lines . like depth only side ways . Not the range setting .
The HB SI Range lines (under the Sonar tab) may seem like weird interval numbers at first glance on the SI display ...
There are 4 SI range lines shown on the display - equal to the user chosen "SI Range" divided by 4 ...
Examples ...
*100ft SI Range divided by 4 = 25ft per range line
* 52ft SI Range divided by 4 = 13ft per range line
Rickie
Ok, Thanks .