Today I picked up some strike king 3xd’s anyone have a depth chart on them? Thanks in advance!
Printable View
Today I picked up some strike king 3xd’s anyone have a depth chart on them? Thanks in advance!
This is what the TW ad says :
Strike King Length Weight Depth Pro Model 3XD 2" 7/16oz 10-12ft
Unfortunately, what they don't say is what size line and what length cast it takes to get the crank down to 10-12ft. But, the dive range is in the same category as a Bandit 300 (which is 8-12ft), so you may be able to use the Bandit Dive Chart (that I'm sure someone will post on here, eventually).
Yeah that what I figured I would do if I didn’t hear anything else. Thanks!
It will be very close to a bandit 300
Here's the Pulling chart :
https://www.crappie.com/crappie/atta...ndit-chart-jpg
Ok I appreciate it!
I am collecting crankbait dive information. My charts show insignificant differences between baits of similar characteristics when used in conjunction with inline weights (pushing or pulling). The weigh is in command. The speed determines the depth. There is a point of null on the dive depth.
Also, I recorded no significant depth change between various line sizes using in line weights. I also observed that the crankbaits have a lifting effect on the weight. For instance: I recorded the depth of a 1oz weight at 15ft line out. The depth was 8 foot. I the added a Bandit 300 to the weighted line. The weight was lifted to 6ft and the Bandit was at 7 foot. This was at 1.2mph.