I have an aluminum boat with t- lock and was wondering what ideas anyone may have for mounting my 7" screen in the back boat is a tiller handle.
I have an aluminum boat with t- lock and was wondering what ideas anyone may have for mounting my 7" screen in the back boat is a tiller handle.
https://uploads.tapatalk-cdn.com/201...2df2c669d2.jpg
Saw these on amazon thought about using these
Sent from my SM-G920V using Tapatalk
Possibly use a swing arm type ram mount
Thanks for the info guys, I've been looking at those but haven't been able to find one with will mount to the t-lock I could be over looking it
Take 2 1/4 20 carriage head bolts. Grind head flat on 2 sides until it fits into T rail. Drill 2 holes in the mounting bracket for finder. Put bracket on bolts install lock washers and nuts. Can slide it up and down rail. Cost about 2 dollars.
Pretty go idea, think I could it a ram mount right enough doing it that way?
Use the two carriage bolts to mount a piece of thick cutting board material or thinner aluminum to the track, then mount the FF base to the cutting board/aluminum material. Ram mounts usually have a round shaped base, and would probably need a larger mounting surface than the t track would provide, so use the cutting board/metal material for stability.
Yes, like jimp said you could use either, or a piece of aluminum angle wide enough for your base. And your not limited to just 2 bolts. So strength and rigidity shouldn't be a issue. I have all kinds of stuff mounted on the T rail of my war eagle.Quote:
Originally Posted by MattL382
Thank y'all I appreciate all of the tips! Gonna have give it a try. Have you ever mounted any spider rigs to your t-rail?
I have a aluminum plate with a 1/2 in pipe bolted to it. On this I have 4 spider lock rod holders mounted on the pipe. Got this in back end of my stick steer for spider rigging or pulling cranks.
The young man that builds Hi-Tec road holders can build a mount as well as Creekslick on the Arkamsas board.
The young man that builds Hi-Tec road holders can build a mount as well as Creekslick on the Arkamsas board.
I've seen Hi-tek he makes some nice stuff I'll have to check in to some of those spider rigs for my boat. I appreciate the help
that's callshy here on the boards Scott Echols HI-TEK STUFFQuote:
Originally Posted by MattL382
Thats Scott Echolls.....he goes by callshy here on th eboardQuote:
Originally Posted by cray