best spider rig poles for the money currently

broke one of my ozarks last weekend and am considering just replacing the whole lot. currently i have 4 14' slab daddys which im not a huge fan of - a little too light. I also have 3 14' ozarks which i like, but would really prefer to run the same pole all across the front and from what i gather the ozarks arent sold anymore so im out of luck. i primarily push cranks under a 3oz weight and run jigs sometimes. would really like to be able to run either setup with the same set of rods. anyone have opinions?

Southern Crappie Rods and ACC Crappie Stix are among the best you can get and don't cost a lot for what you get.

Southern crappie in T series. What they are designed for. Great service and better pricing.


Sent from my iPhone using Crappie.com

What they said ^
Southern Crappie

Sent from my SM-G960U using Crappie.com Fishing mobile app

If I were using that much weight "Pushing" cranks &/or jigs ... I'd consider 14' PST rods from BnM or even their new Pow-R-troller rods. :twocents

I have a full set of 14' ozarks if your working them out i would be glad to take them off your hands!

That being said for the money southern crappie rods are hard to beat. I actually have 3 of the 143T (2oz rated) and they are tough as nails i use them pulling cranks. I was using them spider rigging until i came up with the ozarks!

Southern crappie T series rods

Where is the best place to buy the Southern Crappie rods?

Only available on their website

Fishing Equipment in Concord, NC

Sent from my SM-G960U using Crappie.com Fishing mobile app

Not sure why the link shows the above way but it works.
Also:
Southerncrappierods.com

You will be working with Ed Duke

Sent from my SM-G960U using Crappie.com Fishing mobile app

has anyone ran the southerns vs the bnm pst vs the ozarks? what pole is going to get me the closest to an ozark?

I do not spider rig nor power troll so not real familiar with Ozark. The only comparison I can offer is that Ozark rods are graphite. Southern crappie are kevlar and carbon fiber. Hope that helps some. You can watch Ed Duke use his rods on Southern Crappie YouTube channel.

Sent from my SM-G960U using Crappie.com Fishing mobile app

I don't know about Ozark but I have been running Southerns for 5 years and love them. I have both regular and the T series. I like the T's better unless there is now wind then the regulars are very good. They tend to blow around in the wind a little . I have bent them in a U shape and not problems and yes I do that occasionally . I like Southerns better than B&M and I have a set of B&M BGJP's. Hope this helps.

Quote:

---

Originally Posted by hambandit

broke one of my ozarks last weekend and am considering just replacing the whole lot. currently i have 4 14' slab daddys which im not a huge fan of - a little too light. I also have 3 14' ozarks which i like, but would really prefer to run the same pole all across the front and from what i gather the ozarks arent sold anymore so im out of luck. i primarily push cranks under a 3oz weight and run jigs sometimes. would really like to be able to run either setup with the same set of rods. anyone have opinions?

---

Why do you say Ozarks are no longer sold? They are available everywhere I looked.

Quote:

---

Originally Posted by Toby from MO

Why do you say Ozarks are no longer sold? They are available everywhere I looked.

---

the Tony edgars aren’t available anywhere that I’ve found. Grizzly jig has some of the old one in 12’, but I’m looking for 14’ or longer.

Quote:

---

Originally Posted by hambandit

the Tony edgars aren’t available anywhere that I’ve found. Grizzly jig has some of the old one in 12’, but I’m looking for 14’ or longer.

---

Oh I gotcha...I was told the "new" Pro Trolling Rods were the same only having the Tony Edgar name removed....a few cosmetic things changed but the rods were the same.

Shoot me a pm. I have 4 of the 143t rods for sale. Great condition. Will make you a bargain for all 4.